Thread: Port Forwarding not working!(ZTE ZXDSL 831AII)

hi guys,
i know this forum is overloaded with tutorials on how to port forward this type of router,and i read them many times but still it not working for me..
So i am posting screen-shots of my settings ......any help welcomes.

"forum not allowed me to post any link here,so i am uploading it in my own website plz visit this"

praveenverma.co.nr/zte.html

Try this

PortForward.com - Port Forwarding Utorrent on the ZTE ZXDSL831

or

PortForward.com - Port Forwarding Utorrent on the NokiaSiemens C2110

If both fails, go to portforward.com and select the version of modem.

Hi try this one

Port Forwarding Using DOS
===========================

1. Go to "RUN" type 'cmd' and enter.

2. Type "telnet 192.168.1.1"

3. Make sure that your Firewall should allow.

4. Type Username: admin ; Pass: admin

6. Go to NAT then

7. Go to Virtual Server

8. Now type "1" to add

Service name <> : utorrent >>or Bittorrent
Protocol : 1 >>for TCP
External start port <> : 55641 >>use same port in all fields above 40000
External end port <> : 55641
Internal start port <> : 55641
Internal end port <> : 55641
Internal server IP address <> : 192.168.1.1

use that same port no in torrent u can also change to any port u wish

9. Now exit to "Main Menu"

10. Press "Save and Reboot" & press '1' to confirm.

Wait for 2 minutes

and Now u hav all done...enjoy:-)

guys frist of all i don't want it for u-torrent that is working perfectly i need to configure it for Counter Strike..and as you can see on the link i posted..
compared to tutorials every thing i did looks correct but ...when i am using canyouseeme.com it told me that port is not open.

Go to portforward.com, select the modem and then select the application you wish to port forward for.

Originally Posted by meetdilip

Go to portforward.com, select the modem and then select the application you wish to port forward for.

for doing this you have to download there software called PFConfig which by the way is not a freeware and i am not in mood to spend money just for forwarding ports..i'll better call a network/hardware guy instead of wasting money on there software...

Originally Posted by demetron

for doing this you have to download there software called PFConfig which by the way is not a freeware and i am not in mood to spend money just for forwarding ports..i'll better call a network/hardware guy instead of wasting money on there software...

No, no need to pay. It is just an ad page. Simply click " Skip this advertisement " and move to the next page.