Thread: Please help - Internet connection mode changed and login prompt for router not coming

Hi,

3 days before, I was trying to set up the PPoE mode and set the username/password in my DSL router (WA3002G4), so that I can access internet both via wifi and my new ipod touch.
But suddenly something disastrous happened.
Now when I am logging in, my wifi is not working - i have to manually attach a patch cord.
Along with this, my IP address scheme has also changed and the properties show:
- Device name : Wan miniport (PPPoE)
Type: PPPoE
Server Type : PPP
Authentication: MD5 CHAP

Now, I am not able to even access my router to revert back the settings. Please tell me any hack back into my router to reset the previous settings of bridge mode. (the login prompt for the router is not coming - I tried on my client IP and server IP as well)

Please help

have u tried hard reset? use a pen tip to press the reset button in the back of router near power switch. press it for 15 seconds and release. Now u have to to reconfigure your router.

There will be a small hole on the backside of your modem. Use a refill and press hold of say 30 seconds when the modem is ON. It will reset your modem to factory settings and you can reconfigure it.

This may help

UTSTAR WA3002-G4 quick reference

Also try:
in TCP/Ip Prtoperties
enter 192.168.1.10
255.255.255.0
192.168.1.1
apply Save.




http://www.indiabroadband.net/broadb...tml#post284804 (192.168.1.1 No access !)