Thread: prob connecting iPhone to teracom

hi guys i just recently bought a teracom-T2-B-Gawv1.4u10Y-BI
type 2 modem. i am not able to configure the WiFi on my iPhone.
the WiFi gets connected but when i open safari it says no internet available. plz help asap.

ps: i am able to browse internet through my pc via ethernet cable. but it doesn't work on iphone.

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

Are you able to detect the SSID on your iPhone ? Tried connecting any other device using wifi (Say laptop) ?

1.Done
2.Done
3.Done.

but still it doesnt work.
yes i can see the SSID in my iphone. i can even get connected to it. but then it says "not connected to internet" wen the wifi logo is still connected,.

ps: i hav not tried in laptop. but the internet works thro my pc ethernet. i bought this modem just to use wifi

Start > Run > cmd > ipconfig/all, post the screen shot.

i dont get u. and its so big

and my iphone ip address is starting with 169.XXX
and the DNS is empty although DHCP is enabled

a screenshot of modem diagnostic test

Configure static IP. Make it as 192.168.1. 25 instead of 169.xx.xx.xx.

still no use. this is the current state of my ipod.
first pic: u can see the connection and ip address
second pic: wifi connected but no internet

Try changing the values so that you do not get the 169.xx.xx.xx IP.

which values bro?

Start > Run > cmd > ipconfig /all, post the screen shot.

which values bro?

see this.
http://www.indiabroadband.net/attach...d-ipconfig.jpg
1.


Post only these data from laptop.
http://www.indiabroadband.net/attach...m-ipconfig.doc

2.
In Teracom wifi settings white list.If enabled disable it.
(MAC addresses are entered if enabled)

i disabled the white list , no prob with that too

this is wat i get if i run the ipconfig/all

there is no wifi in my pc. just connected it directly thro LAN

i am able to browse internet through my pc via ethernet cable

Delete the Ipconfig /all picture. No tunnel data needed.
Copy/paste only for LAN network.
Even without WIFI in Desktop, your Iphone can work in wifi mode.
Wifi in computer( desktop/laptop) for confirming you have correct settings in router.

Are you sure the passphrase or the key is right (sometimes it gets connected but has no access to the internet or network)
How much time does the iphone take to connect the the router?
I think the router is not assigning the external IP address to the device properly or the device is not obtaining the external IP address correctly. Try changing the external IP address manually. (The external IP address should be 192.168.1.2 or 192.168.1.3 (If the PC is already connected to the router).

edit : Please change the IP address in the DHCP tab to - 192.168.1.3 and u should be good.

u cant change the ip adress in DHCP tab. iphone aloows only to change in static ip but it too doesnt work!
may be i should connect a laptop to the modem first and config it wirelessly?
but i've done thro lan already

@blkhrt

u cant change the ip adress in DHCP tab.....

i
Try in router.
192.168.1.1/advance_menu.html
or
192.168.1.1/secur_menu.html.

2.

but i've done thro lan already

Delete previous screen shot. ( Tunnel data not needed )
Post again screen shot .showing LAN connection showing ethernet card dns etc.

@Blkhrt You have to change your internal IP address, as shown in the Iphone, 169.x.x.x should be 192.168.1.x (replace x with 2 or 3)