Thread: can not access wireless lan and internet at same time

Hi, I am new to this forum.
following is my connection status.
hardware :
i5 processor, intel motherboard, 4gb ram + 1gb nvidia graphic card pc.
win 7 32 bit.
dlink adsl 2+ router GLB 502T [ I am using this with BSNL broadband as in wired.]
edimax 802.11b/g wireless router [ I want to connect my laptop & mobile to access n sync with desk.]

I have connected it as per edimax's diagram ..
[please see attachments]

dlink has only one lan port for lan card of pc. As per diagram I have connected provided by edimax.

then i go through the setup of edimax on 192.168.2.1 and finish it with security .. I am able to communicate with devices as lan .. file share is possbile but same time internet is not accessible ..
how to do that ?

can you guys please help me out on this ??

Presume you got connected in lan mode with ADSL modem only.
1
.Try in "Always ON" PPP/PPPoE mode
( userid entered in adsl modem wan page. Uncheck "bridged"
2.
Enable dhcp in modem and give a range.say 192.168.1.3 to 192.168.1.10
3.
See in "Broadband How to.. "forum ....
@Just4kix: guide for similar set up.
Procedure is same.
4. Still problem
Copy/Paste data ipconfig /all

thanks for reply.
after connecting edimax i get setup on 192.168.2.1 // not on 1.1 .. so how can i do that. after connecting hardware should i follow edimax only or should i prepare my adsl router for this type of connection ? can u please explain ? ?



Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82578DC Gigabit Network Connec
on

DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::2c9f:52e:f961:50f8%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, November 12, 2010 12:18:45 AM
Lease Expires . . . . . . . . . . : Friday, November 12, 2010 2:18:45 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 242250172
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-EE-3E-D0-70-71-BC-76-C0-

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{C685535B-1772-46A7-BC3A-067CE5E5EDB3}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:349a:25dc:3f57:fefd(Pr
erred)
Link-local IPv6 Address . . . . . : fe80::349a:25dc:3f57:fefd%12(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

step1 :
You have set up GLB502T with 192.168.1.1 Default gateway.
Step2 :
Connect EDIMAX to computer same way and its address remain
as 192.168.2.1 or you can change it as 192.168.1.2
( In menu option will be available)
Step3:
remove rj45 from computer end and connect to LAN port of modem. { Modem LAN Port to Edimax Internet port}
Step 4:
Take another Rj45 from Edimax lan1 and connect to computer lan.

Step 5:
Create a Wireless LAN ( same as for a Lan connection )
Step 6:
Check WIFI in another system or own laptop ( without any cable )
Step 7:
Check Ipconfig /all for LAN and wlan only.
( Tunnel data not needed/required for the present.)
In network settings page/s.You can also disable IPV6 box
Step 8:
Confirm Internet connection oK and surfing normal.

Feedback.

step1 :
You have set up GLB502T with 192.168.1.1 Default gateway.
[currently using it as connection from same address. do i need to change any thing specific?]
Step2 :
Connect EDIMAX to computer same way and its address remain
as 192.168.2.1 or you can change it as 192.168.1.2
( In menu option will be available)
Connected as you mentioned
Step3:
remove rj45 from computer end and connect to LAN port of modem. { Modem LAN Port to Edimax Internet port}
Connected as you mentioned
Step 4:
Take another Rj45 from Edimax lan1 and connect to computer lan.
Connected as you mentioned
Step 5:
Create a Wireless LAN ( same as for a Lan connection )
its not showing up in options on desktop
Step 6:
Check WIFI in another system or own laptop ( without any cable )
Step 7:
Check Ipconfig /all for LAN and wlan only.
( Tunnel data not needed/required for the present.)
In network settings page/s.You can also disable IPV6 box
Step 8:
Confirm Internet connection oK and surfing normal.

Step 8:
Confirm Internet connection oK and surfing normal.
in Lan mode via Edimax LAN port connection.
Step 5:
Create a Wireless LAN ( same as for a Lan connection )
its not showing up in options on desktop
Assuming your OS is XP sp3
or if Windows 7 see in control panel
Network settings.
9.
Confirm your desktop or laptop has a wireless LAN adapter card.
START/ All programs/Accessories/Communications
Install a wireless network
Follow instructions.
10.
Then usual ipconfig /all only for WLAN needed.
(Tunnel data delete Also in network settings disable IPV6 box )
11.
Additional reference : ( credit @Just4kix) about 240 KB.
http://www.indiabroadband.net/attach...guide-pics.jpg

PS: presently on a Mac OS computer.

I don't want to make my desktop as wireless .. i am happy with my wired connection .. i just want to share my connection with my laptop with out any wire..
is it possible ..
i am able to connect it with lan when i configure edimax as router with ip 192.168.2.1 .. but at same time i can not use internet.
i remember as per my knoledge .. i used to make divisions of ip range.. ie. 1 to 40 and 40 to 254.. on 192.168.2. but where to change that .. i m totally confused here ..
any clue ??

Please respond to queries item wise.
or see "broadband How to ......" forum for guide by @just4Kix for connecting ADSL modemwith wifi router.
Procedure is same.
Usually dhcp option is seen in LAN menu page.

Originally Posted by essbebe

Please respond to queries item wise.
or see "broadband How to ......" forum for guide by @just4Kix for connecting ADSL modemwith wifi router.
Procedure is same.
Usually dhcp if ennabled is seen in LAN menu page.

please bare with me .. sorry for going wrong .. the case here is i have set one connection on 192.168.1.1 with dlink and its working. i am accessing it through this .
my pc has only on board card and its using this connection. now i want to add edimax for wireless lan an internet sharing. now when ever i connect it to pc . i get wireless lan on setting quick setup of edimax router.
[note that : i haven't changed any thing in dlink router which is curruntly running internet on desktop. just changed rj45 as per diagram.]

now edimax setup runs on 192.168.2.1 ip. i have set my lan connection to detect ip addresses automatically. when ever i change them manually this lan gets disconnected and shows error. on troubleshoot windows sets it to automatic detection. so
at this stage lan is working. but not able to share internet connection with laptop on wireless mode.

i hope i clear you the case ..
thanks again for ur interest. please help..

Presume you are "stuck" in step 8.

Step 12:
(a)In computer (laptop)
START run type cmd Ok
New window
Type ipconfig /all
Copy/paste here ONLY for WLAN
( No tunnel data )

Step 13:
(b) same as above for desktop LAN data.

this is status of my edimax router when i connect

Mode AP
Band 2.4 GHz (B+G)
SSID vre*******
Channel Number 11
Encryption WPA
BSSID 00:1f:1f:51:55:78
Associated Clients 0
TCP/IP Configuration
Attain IP Protocol Fixed IP
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.2.1
DHCP Server Enabled
MAC Address 00:1f:1f:51:55:78
WAN Settings
Attain IP Protocol PPPoE Disconnected
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Default Gateway 0.0.0.0
MAC Address 00:1f:1f:51:55:79

step 14:

IP Address 192.168.2.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.2.1

Both cannot be same.
Select Obtain Ip address automatically in TCP/IP properties page.

sorry .. I am currently reading ur steps.. thing was i left page on browser n working on this .. now i will paste data from lap top and desktop..
thank you..

Windows IP Configuration when on desktop

Host Name . . . . . . . . . . . . : admin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82578DC Gigabit Network Conne
on
Physical Address. . . . . . . . . : 70-71-BC-76-C0-F1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.2.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, November 12, 2010 10:34:43 PM
Lease Expires . . . . . . . . . . : Monday, November 22, 2010 10:35:49 PM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 208.67.222.222
208.67.220.220
NetBIOS over Tcpip. . . . . . . . : Enabled


---------------------------------------------------------------------

Host Name . . . . . . . . . . . . : LPTP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
Physical Address. . . . . . . . . : 70-F1-A1-82-48-C2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

this is what it comes without tunnel data.

Step 15 :
USE only GLB502T
and post ipconfig /all
Step 16;
Confirm you get connected to Internet and surf normally.
Step 17:
back to steps 2 to 4
confirm LAN mode Ok as in step 16.