Thread: configure nokia siemens residential router for nokia 5800 wifi

plz help i have to connect nokia 5800 with my router through wifi. i have read all the threads regarding settings buit still i m unable to connect.

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your system, set " Obtain IP address automatically ".

Feedback.

i have enabled dhcp changed to pppoe mode and all other settings have been done as shown in the threads but none worked.plz solve this problem of mine

1. How many system do you use ? Which OS ?

2. Enabled wireless in the modem ? Post a screen shot of wireless configuration page. You can post the images as

3. Start > Run > cmd > ipconfig/all, post the screen shot.

i am using only one system with windows xp yes wireless is enabled by default in the modem.here is the image.
i53.tinypic.com/119uhcj.jpg

Originally Posted by sibbal

i am using only one system with windows xp yes wireless is enabled by default in the modem.here is the image.
i53.tinypic.com/119uhcj.jpg

i have enabled dhcp but here it is showing disabled in the screen shot.if i m not wrong

i55.tinypic.com/15my25e.jpg
this pic is of the enabled dhcp server

Are you able to detect the SSID ( Name given to the wireless network) in your phone ?

Please post the screen shot of wireless page.

yes sir i m able to detect SSID it is mentioned as "default".
regards

i54.tinypic.com/25f7eq8.jpg
image of wireless page

and i also want to add that my obile gets connected to it but when i want to open a page it shows "invalid server name".
regards.

i56.tinypic.com/j7cmk2.jpg check this image also plzz

Control panel > Network connection > Local area connection > Properties > Internet protocol (TCP/IP) properties > Select " Use the following IP address > Enter these values

IP address : 192.1681.25

Subnet mask : 255.255.255.0

Default gateway : 192.168.1.1


Also in the first screen shot , change your country to " India".

@sibbal
i have enabled dhcp changed to pppoe mode
1.Your screen shot shows , you are using a "DIALER" to connect.
( USERID and PW entered in computer window.
http://i53.tinypic.com/119uhcj.jpg
2.
In WAN page of modem de select box "Bridged"
Select PPP/PPPoE
Next
Enter your userID PW etc

3. Also enable UpNP box if seen.
SAVE REBOOT.
4.
Recheck IPconfig /all
will be different see 1.

Feedback.

VERY MUCH THANKS TO ALL OF U.AT LAST I HAVE SOLVED IT.too MANY THANKS TO U ALSO

You should post "How you solved it ?" details needed please.