Thread: DNA A201 BEI modem

I want to use the USB port for the second system. I have already instaled the USB driver. Under new hardware wizard,it shows "the device is working properly.Though the network is showing as "Connected", internet is not getting connected.

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

Access the modem menu with USBport
connected to computer.
Allot 192.168.1.2 as default gateway for USB port
192.168.1.1 for LAN mode.

Your unit seems same as UT300r2u model.
http://www.calcutta.bsnl.co.in/dataoneinstall/mu04.html

http://www.calcutta.bsnl.co.in/datao...all/usb04.html

Could you please elaborate the procedure a bit?

connect computer 1 to lan port and set as usual.
1.Computer 2 :
Start Network LAN
properties
select TCP/IP
properties
enter 192.168.1.10
255.255.255.0
192.168.1.2
dns
obtain automatically.
apply save.


Connect computer USB port to modem.

See procedure given in web links given to upload drivers.

A new LAn (USB)network would have been created.

Still USB internet through port is not working.

Post ipconfig /all data for both desktop and laptop
with lan and USB connections.

Uninstall all drivers and follow procedure given below.
check here also.
http://www.semindia.in/pdf/USB_Drive...tion_Guide.pdf
http://www.semindia.in/softwareDownload/USB-Drivers.zip

Originally Posted by meetdilip

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

Internet is comming only in one system either in lan or usb. Does not come simultaneously in both.

Originally Posted by essbebe

connect computer 1 to lan port and set as usual.
1.Computer 2 :
Start Network LAN
properties
select TCP/IP
properties
enter 192.168.1.10
255.255.255.0
192.168.1.2
dns
obtain automatically.
apply save.


Connect computer USB port to modem.

See procedure given in web links given to upload drivers.

A new LAn (USB)network would have been created.

Internet is comming in one system either in lan or USB. Does not come simultaneously in both.

Originally Posted by meetdilip

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

Except Configuring in PPPoE whixh I am unable to do since I do not know the procedure; I have tried point no. 2 and 3. The internet is comming in one system either in lan or USB. Does not come simultaneously in both. In my home I installed the driver and got the internet in both lan and USB simultaneously. Same thing, I am not getting in my office system.

Are you using Bridge mode ? Means you need to click " connect " on a dialer to access internet ?

To configure the modem in PPPoE or also known as " Always ON "

1. Type 192.168.1.1 in your browser.

2. ID and password is admin.

3. Check the WAN page, you will find an entry with 0_35.

4. Click " Edit " and browse through pages. You will find an option to choose between Bridge and PPPoE.

My internet is less than three months old. By setting PPPoE also it is not working.

Log in to the modem, post a screen shot of modem menu page and the listing with 0_35. Totally 2 screen shots.

Post the links without http://www. for example, tinypic.com/is25568.jpg

Post your ipconfig/all data too.

Procedure:

Start > Run >cmd > ipconfig/all , post the screen shot.

See my signature links. Model is same as Ut300r2u or wa 3002_g4 ( less wifi ).

http://www.indiabroadband.net/attach...-bsnl201be.jpg

I have not understood, what you wanted me to do. When I did Start>run>ipconfig the black screen is not remaining. It goes away immidiately after opening. What is to be posted and where & how.

Start > Run >cmd > ipconfig/all , post the screen shot.

For EACH system desktop computer.

Procedure
START
Select RUN
New window opens
type cmd
New window opens
Type ipconfig /all

COPY/PASTE data here . ONLY for LAN or WLAN for both desktops.
( No tunnel data even if seen )
EXAMPLE
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\kavika>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : samba
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NETGEAR WG511v2 54 Mbps Wireless PC
Card
Physical Address. . . . . . . . . : 00-14-6C-8F-9B-67
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.2.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 8.8.8.8
208.67.220.220



2.

By setting PPPoE also it is not working.

Open 192.168.1.1 admin PW admin
modem menu pages open.
select WAN page
select 0_35 link EDIT
next page
select PPP/PPPoE ( Not "bridged")
Next
enter UserID ( without @bsnl.in and PW
In LAN menu page Confirm DHCP is enabled.
give range 192.168.1.2 to 192.168.1.10
SAVE REboot. wait for two minutes.

Sorry, there has been some changes to the setup. Our IT officer has changes the entire setup. Now, there are two systems. One is server another is client. Internet is available only with the client. Is it possible to have the internet in the server PC as well?

Read thread from beginning.
Set modem to "ALways On " mode.PPP/PPPoE
not " bridged" etc.
Who is "server" and who is "client"
Presume you have two computers, & modem /wifi router under your control, which you want to connect to Internet at the same time.

Pls give me a step by step info for entering the broadband username/password in the modem. I am asking this for my young bro back home, who is a novice, and I dont have the modem here with me. I have talked him to go into the main modem menu and he says there are 4 tabs in the menu :-
1) device Info 2) Advanced Setup, 3) Diagnostics, 4) management

I tried to talk him through the advanced setup menu, but he could not find a username/password input field anywhere. ( Just to let u know- the modem was reset, so we need to put in those details)

Anyone with this modem type pls help Thanks in advance.

Enter VPI/VCI as 0_35. Edit it and you can find to choose an option between PPPoE and Bridge. If you browse through the pages, you can find an option to enter ID and password.

see this link for screen shots.
The little I know about Dataone Broadband Services offered by BSNL