Thread: Automatically connect to WIFI using laptop

Hi,

I have BSNL broadband connection - WA3002G4 modem - Vista OS in laptop. I am facing a problem when I try to connect to my WIFI.

The problem is i have to connect the laptop to modem through ethernet cable, then goto 192.168.1.1 > Wireless > Basic -> Save apply - then only my laptop is detecting the wireless connetion and connects to it.

The WLAN light is glowing (even before enabling it as i mentioned above - but my laptop doesnt detect the connection until i save/apply in wireless)

Since I have to do this everytime the power to my modem is disconnected, itis troubling me as my modem is in a different room.

All inputs are appreciated.

Thanks,
Senthil

Please post the screen shot of your wireless page.

Refer

UTSTAR WA3002-G4 quick reference

If you are in "Dialer" mode change to "Always On" mode
Uncheck "Bridged: in wan page
Select PPP/PPPoE enter userId/PW etc.
Then in LAn page enable dhcp
GIVE A RANGE SAY 192.168.1.3 TO 192.168.1 10
gO TO mANGEMENT
SAVE REBOOT wait for 2 minutes.

In laptop and Desktop
TCP/IP properties
Obtain Ip address automatically.
Apply Save.

Refer my signature links