Thread: firmware for WA1003A

need the firmware for quidway huawei WA1003A adsl modem provided by datone.

googling gives no results.

pls help.

Hi i am also searching for the firmware. I have seen the same question in huawei support site and the reply is always the same..."Contact your ISP".. well BSNL as we all kow is not bothered. Benefit of being a govt organization. Well so lets throw out the crappy Huawei and get info on someone who is willing to back the product they make. someone who is comitted to deliver the best to their customers

with simpathies
sibi

Quidway WA-1003A ADSL MODEM CONNECTION

please see the menu at this web site and check settings.
IF
still no solution to your problem,

THEN
post it here for suggestions/help from members.

if possible post the page showing snr/attn/mod selected/ line speed data.
and
the page containing firmware version details.

why do you want to upgrade ?

Hi essbebe/Superprash2003

Thank you essbebe for the url . Unfortunately it does not have the firmware i am looking for.

My moden is higly unstable now. i drops connection evey 2-3 minutes. The line is clear. Itried with a different modem and it works ok.

I was trying to see if it was the firmware instability that was causing the prob.

Since i could not find firmware, I reset my moden (using reset key ) and now modem is back to factory settings. The problem now is reconfiguraing it back to BSNL settings. If you have the WA1003a series modem, could you PLS give me the configuration so that i can set it back and least connect.

thanks and Regards
sibi

The little I know about Dataone Broadband Services offered by BSNL

if possible post the page showing snr/attn/mod selected/ line speed data.
and
the page containing firmware version details

well the link given above by essbebe will configure your modem to connect to BSNL.. regarding the disconnection , you could try disconnecting all telephones temporarily and then making sure that you have splitter in place. if you still face disconnections ( inspite of a good SNR ) then you could think about upgrading firmware, for which you first need another member from this forum who has successfully done so

I have this modem. I have been using this for past 2 years, didnt had any stability issues... Can you post status of LED's when connection drops? also check the system log of the modem. I am sure you find the reason for your disconnection in the log.

@harisk
Please post the Firmware version.
for @sibijv to check his version.
=============
Select the status menu or
annex screen shot of page
showing SNR Attn Mod selected Line speed etc
REF:
http://chennai.bsnl.co.in/BBS/WA1003PasswordChange.htm

My Modem details are

Gateway V200R002C01B020
ATM Driver 4.05.03.00
DSL HAL 3.02.04.00
DSL Datapump 3.02.06.00 Annex A
SAR HAL 01.07.02
PDSP Firmware 0.49
Wireless Firmware 1.6.0.33
Wireless APDK 5.7.0.5,
Boot Loader 0.22.02

The status led is always blinking. Does not light up steady as it should. Could you take an image of the modem firmware and send across to me.

Thanks and Regards

Originally Posted by harisk

I have this modem. I have been using this for past 2 years, didnt had any stability issues... Can you post status of LED's when connection drops? also check the system log of the modem. I am sure you find the reason for your disconnection in the log.