Thread: ut starcomm router as wi fi access point

hi everybody,
my first post here,
i have connected my old tata adsl router( eci b focus 342+) to bsnl broadband as adsl router. i now want to connect the ut starcomm wifi (bsnl type 4) as just wifi access point.
basically i have 3 computers,
one desktop and 2 laptops.
i just want wifi switched on when i want and desktop to be connected over ethernet.

with eci router with 4 ethernet ports,i have connected one to desk top and second port to bsnl router.

now i have two problems-

1)eci router although configured and connected ,its through user account and not through Admin account.
i have reset the router but i am now able to use the default admin and password as password.i did call up tata adsl guys but they are of no use.

2)i changed default ip address of bsnl router to 192.168.2.1
and my eci router is 192.168.1.1 but i am now able to set this bsnl router as wifi access point.

can you help me in getting admin password for this eci router as i feel dhcp has to be enabled from admin account.

how do we connect all this?

pls help.

UPDATE: 29th 0950PM

i just want wifi switched on when i want and desktop to be connected over ethernet.

WA3002_g4 itself can be used for desktop and wifi mode.
.Check my signature link for this model . And select Chennai website.
Select PPP/PPPoE mode and enter userid/pw in modem itself.
Enable DHCP and give range say 192.168.1.3 to 192.168.1.10
In desktop and laptop
Network/Lan/Wlan/ properties
network settings
tcp/ip
properties
Obtain Ip address automatically.
You can restrict access to WIFI by using MAC filters.desktop.
and using security passwords (WPA etc )

Keep Focu342 unit programmed , as standby for Desktop.


===================================

can you help me in getting admin password for this eci router.....

Eci - B-FOCuS 342+ WTR (Eci Firmware)
admin password
Also try
user password
support password
2. For UTSTAR Wa3002_g4 allot lan address 192.168.2.1
3.Please post as Annexure a screenshot of the Device info or connection status.

Procedure:
When posting here select "Go advanced"
Scroll down
Select Attachments
Manage annexures
Upload
or
Upload screenshot ( preferred jpg ) at tinypic.com and give link here . delete http://www