LinkBack URL
About LinkBacksPlease help me, i need to port forwrd the port 82, but am not geeting the exact way to do it... I tried all the possible ways, check these images hope ull know my problem...
Port Forwrding In UtStarcom wa3002g4 Please help me, i need to port forwrd the port 82, but am not geeting the exact way to do it... I tried all the possible ways, check these images hope ull know my problem...
I have already went through them, thats the reason i attached the images of even that tool provided by Portforward.com... U see it...
same reply applies here.
I think you have tried siemen's modem c2110 also. This firmware can be upgraded. Member @talktoanil has given detailed replies in a thread here.
http://www.indiabroadband.net/bsnl-b...tml#post313042 (Help UtStarcom wa3002g4)
You need Port triggering menu.
I updated my modem then i got that Virtual server menu in nat... But now am not getting how to port forward... Please help me out from dis... Am not getting how to forward this.. Please check out d images i posted... If u need some more details then please say...
For Port triggering menu: for port 82
NAT Virtual server:
192.168.1.1/scvrtsrv.cmd?action= ............. available.
Port triggering:
192.168.1.1/scprttrg.cmd?action=view missing
DMZ:
192.168.1.1/scdmz.html....................... availa.ble.
etc
Option 1 :
If you are confident of doing Firmware updates,
either for C2110 or wa3002-g4 please confirm, present
FW version/s
Screen shot/s of Device info preferred.
Option 2 :
As mentioned repeatedly here in this forum,
no PF needed when on Dialer mode.
use Antivirus and antimalware programs/applications. and a Firewall.
Option 3 :
If the WA3002_g4 can be exchanged "as it is" with BSNL try it
use Antivirus and antimalware programs/applications. and firewall
application.
Option 4 :
Try a proxy site. or
browser Opera Turbo
Option 5 :
Try to access modem/router menu via telnet
WA3002-G4 QUICK GUIDE=>20 MODEMS 74,000+45,400 hits
*Beetel220BX/450TCI type !****
*AN1020-21 type models ****23,700 hits ** BSNL LINKS**9900******USAGE check ** 54,600
Since i purchased it, i cant exchange it... So how to update my modem & where will i get the latest updates for this modem???
If nothing works, switch to Bridge mode. All ports are open by default.
I need the firmware udates of this UtStarcom wa3002g4.. if i update other firrmwares wont i face any problems in future??? I need to do port fwding, coz i want to run some applications tht need port fwdng...
How to switch to bridge mode?? And wat hapens if i switch to it??? I mean wats d diff in now & then???
Last edited by san143; 01-11-11 at 08:24 PM. Reason: Automerged Doublepost
You are trying Option 2 :
In WAN page Uncheck PPP/PPPoE and select Box "Bridged"
Save/REBoot. wait for two minutes.
Use dialer, and and enter userId/PW in computer window.
Check your applications and see any difference .
Feedback>
Oops by doing it i can open just a single port that is 80, i cant see any other option to open other ports...
You will find an option to choose between Bridge or PPPoE when you click " Edit " for the 0_35 entry in the configuration page.Originally Posted by san143
Once in Bridge mode, you need to create a dialer and then enter the ID and password in it to connect to internet. You can get out of the connection by disconnecting the dialer or simply shutting down your system.
Main difference is that all ports are open and hence you do not need port forwarding or similar. But if you need to connect more than one system at the same time, one system must act as server and others as client connected to it. It is advisable to use a good firewall (whether in Bridge mode or not). I am having PPPoE mode and still using Zone alarm free firewall which is very efficient.
Hope this helped.
No need to open any port. All ports are open by default.Oops by doing it i can open just a single port that is 80, i cant see any other option to open other ports...
Last edited by meetdilip; 01-11-11 at 09:01 PM. Reason: Automerged Doublepost
Oh ok but i checked in the website canyouseeme.org, it just showed me that port 80 is open & all other ports closed...
You can try using other ports in utorrent and check. It will work.
I tried it already, got a error message, coz the port will forwarded till the utorrent is open, once i exit the utorrent, the port will be closed even... And the if i keep the utorrent open then i cant use the same port to other application...
Have you entered any values in port forwarding fields of your modem ? If yes, remove it and check. I am not sure if the same port can be used by two application at the same time.
When i go in bridging mode, i dont see any virtual servers or NAT, then how to enter the value??? And am sure that single port cant be used for two applications, coz i already tried it & got an error message...
Fine. You wanted port 80 open and it is open now. It must have met your requirement.
Nope buddy please see above... Please isnt thr any good option??? Cant i port fwd the diff ports???
Not sure why it is happening to you. In normal case, ports must be open by default. If you are using a firewall or antivirus, disable it and check.
When After Bridging??
Ya, unless Windows firewall has some settings to block your program, you should be able to use them without port forwarding.
Now i dont see any port open... Disabled all the firewalls too...
check your DynamicIP now.
What Is My IP Address? Lookup IP, Hide IP, Change IP, Trace IP and more...
Post it here. Hope modem ID/PW admin and admin
I can access your modem ONLY and check the settings.
available upto 1230 AM.
@san143 off line. deleted my IP address etc.
Last edited by essbebe; 01-11-11 at 11:22 PM.
M Sorry essbebe, i was offline... Please help me...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Reply With Quote