Thread: Unable to connect Belkin N150 wireless router

Hi All,

I have got a new Belkin N150 router for D-link GLB502T. I am unable to setup wireless network.
Troubleshooting:
1. I checked quick network installation guide - everything seems to be fine. But when I tried setting up using CD (provided by Belkin) but it says "unable to connect to the router via any of the network adaptor" but i am still able to connect to internet
2. When I run 192.168.2.1 I get D-link Configuration page not Belkin Configuration page.

Can someone help?

try this guide by @Just4Kix
India Broadband Forum
Briefly :
(A)
Connect GLB502T in "Always On" mode.
Enter UserID/PW in modem page.
Enable DHCP
Confirm connected to Internet Ok.
modem Ip will remain 192.168.1.1
(B)
.
BelkinN150 wifi router
Default Ip address as 192.168.2.1
( or what is seen in label of wifi router)
Connect Rj45 from GLB502T to WAN port.
connect another rj45 from Belkin LAN1 to desktop .
confirm Internet works.

(C)Now try WIFI on laptop ( if settings were made in Belkin wifi router)
Use SSID and PASSword as shown in Label of Belkins.
http://cache-www.belkin.com/support/...150_Router.pdf

but i am still able to connect to internet

presume in condition (B) above. confirm.

(D) Copy/paste ipconfig /all
procedure:
Start RUN type cmd OK
New window
type ipconfig /all.
Delete when posting here tunnel data if seen.