Thread: Beetel 450bxi not work after reset

MY INTERNET WAS NOT WOKING WELL SO I TRIED TO RESET IT BY USING A PEN AND PRESSED THE RESET BUTTON ON THE BACK SIDE FOR 30 SECONDS UNIT THE MODEM RESTARTED AFTER RESETTING THE MODEM IS NOT TAKING THE IP ADDRESS AND THE MODEM CONFIGURATION SITE 192.168.1.1 IS ALSO NOT OPENING ,ALL THE LIGHTS ARE WORKING ON THE MODEM WHEN I TRY TO RENEW THE IP ADD NOTHING HAPPENS.

UNABLE TO POST A SCREEN SHOT AS IT SAYS ONLY ALLOWED AFTER 15 POSTS

I AM USING WINDOWS XP SP3
BEETEL 450BXI ADSL2 + ROUTER

PLS HELP

RPLY SOON

SPECIAL MENTION TO essbebe....GET ME OUT OF THIS SITUATION PLS

Republic Day Greetings to all.
192.168.1.1 not accessed
START
Network
LAN
Properties
Network settings page
Select TCP/IP
Properties
enter 192.168.1.10
subnet 255.255.255.0
default 192.168.1.1
DNS
8.8.8.8 and 208.67.220.220
Apply Save.
Then try 192.168.1.1 admin admin
Also

http://www.indiabroadband.net/broadb...tml#post284804 (192.168.1.1 No access !)

Para two:
Please see this link for setting up Beetel450BXI.

http://clickmakesense.blogspot.com/2...-wireless.html

or

http://www.chennai.bsnl.co.in/BBS/WA...eless_security

(1)First try lan mode
(2)then wifi.
(3)Since you RESET the unit to factory default,
If you use a dialer in computer and enter
Userid and PW you may get connected to Internet.
(4)
Modem wifi router wa3002_g4/Beetel450BXI/Nokia siemens 1600
DNA 212_I DNA 213_I etc have the same Hardware board.
( Minor changes in Menu items )
Adsl modems Beeetel 110BXI/Beetel220BX/Ut300r2U/Dareglobal 108 etc. ( new issue )
also same except for wifi board not available/included.
See my signature links below.

Feedback.

the first method is not working.....i entered the settings still no response frm 192.168.1.1
the second method is also not workin beacuse the wifi asks for wpa key....

the first method is not working.....i entered the settings still no response frm 192.168.1.1
the second method is also not workin beacuse the wifi asks for wpa key.

(A). First method: Para One :
RESET Modem: entered IP details in computer. Not working >
NO access to modem still with IP 192.168.1.1 admin admin .
What is the error message you got ?

Try ID: user PW: password
or ID: support PW: password.

in command prompt ping 192.168.1.1

(B) second method :
IF you cannot access modem menu pages as mentioned above

Did you try Para two (3 ) Dialer mode ?

(C)

the wifi asks for wpa key.

Does the Wireless network page show a SSID name ?

(D)
copy/paste ipconfig /all data here.

Part a
the error msg is common...the page cannot be displayed

part b
the internet does not get connected in the dialer mode with my username and password it shows error 678

part c
ssid shows brodcom

also ping 192.168.1.1 says destionation host unreachable when ip auto configured when manually set it says request timed out

part d
inconfig /all

connection specified dns suffix :
Description : Realteck rt l8139
physical address : 00-30-18-af-f3-eb
dhcp enabled : Yes
autoconfig: Yes
autoconfig ip address - 169.254.178.38
subnetmask: 255.255.0.0
default gateway:

autoconfig ip address - 169.254.178.38

autoconfig ip address - 169.254.178.38
subnetmask: 255.255.0.0
default gateway:

ERROR>>>>>>>> Default Windows IP Private LAN address.

You have not followed this procedure.
Default Gateway is missing.
IN computer:
START
Network
LAN
Properties
Network settings page
Select TCP/IP
Properties
enter 192.168.1.10
subnet 255.255.255.0
default 192.168.1.1
DNS
8.8.8.8 and 208.67.220.220
Apply Save.
Then try 192.168.1.1 admin admin
after above
Repost ipconfig /all

Originally Posted by essbebe

ERROR>>>>>>>> Default Windows IP Private LAN address.

You have not followed this procedure.
Default Gateway is missing.
IN computer:
START
Network
LAN
Properties
Network settings page
Select TCP/IP
Properties
enter 192.168.1.10
subnet 255.255.255.0
default 192.168.1.1
DNS
8.8.8.8 and 208.67.220.220
Apply Save.
Then try 192.168.1.1 admin admin
after above
Repost ipconfig /all

its working after this tutorial....
now 192.168.1.1 is opening
can i now set the ip settting automatically or let it be the sameas above

if you are using Only one system ( desktop or laptop)
these settings can remain.

1.
You should also backup modem/router settings .
Go to Management > select Backup
say to C:/My Documents / Modem working 26th Jan
If you dont' use wifi mode disable it in router.
2.
Also create a System Restore Point for this day.

i use it on both laptop and computer...depends on electricity....
i sometimes use wifi once or twice a month

(A)
Hope you have "backed up" saved current settings of the router.

(B)
You have to change to "always On" mode PPP/PPPoE
UserId/PW entered/stored. in wan page.

(C)
IN LAN menu page enable DHCP.
Give a range 192.168.1.10 to say 192.168.1.15

(D)
In laptop you can select for both LAN and WLAN
in Network settings
Obtain IP address automatically.)
( No change in desktop Lan Mode )

Feedback :

ok i'll back it up.....

thanxx for the help.....
u made my day thanxx again

by the way is there any updated firmware for this modem

there any updated firmware for this modem

why ?

Code:

 IF IT WORKS DON'T REPAIR

Check in my signature links. 220BX

connection specified dns suffix :
Description : Realtek PCIe GBE Family Controller
physical address : 00-1C-...
dhcp enabled : No
IP Address: 192.168.1.10
subnetmask: 255.255.255.0
default gateway:192.168.1.1
DNS Servers... 8.8.8.8
.................... 208.67.220.220

However it does not work.

Problem started when I had setup some firewall rules where I had put MAC filter and clicked 'allow below'. However the table had no mac address selected.

Then, I had used reset circular button at bottom of router and pressed for 10 mins.

Although, this problem exists, the router name in wireless settings is showing as Broadcom that was the default. However, I dont know the default password to connect to it.

Please help

the router name in wireless settings is showing as Broadcom that was the default.

Presume you could access the modem/router menu after the LED display for 10 minutes ! Min 6 sec max 30 to 40 seconds for RESET.

If YES check this link and give feedback.
Chennai Telephones- Changing password in DataOne Pre-configured modem
Disable Firewall application for testing purpose/s to connect to Internet.
feedback.

No, I couldn't access 192.168.1.1.. that is I couldn't access the menu pages of router.

I can see 'broadcom' (the default name), in the available wireless networks on my WIFI. But I dont know the default wireless password.

It assigns me to 169 network address, I'm not sure if resetting the router resets the firewall rules as well.

Thanks,

No, I couldn't access 192.168.1.1.. that is I couldn't access the menu pages of router.

See Post No 6 and try again..

Confirm you cannot access in LAN mode also.

http://www.indiabroadband.net/broadb...tml#post284804 (192.168.1.1 No access !)

I tried Post 6 already and results are as above (Post 13)

When connected to LAN, in auto assigned IP it assigns 169.... and then says limited connectivity.

When in static IP mode (1.10 or other), it successfully connects but does not allow to navigate to 192.168.1.1. (Which used to load earlier).

This problem started after I by mistake clicked on enable the below address in firewall (with empty list).

I reset the router but I'm not sure if the firewall settings was reset as well. The router name (as it appears in available wireless settings shows the default Broadcom (custom was something else) but did I reset the router successfully ?

What should be the default password to connect via wireless ? Any thing else I can try ?

Is there anyway to connect via "Line" port and reset the password ?

Thanks,

when you reset router every setting reset to default.in your static ip setting set 192.168.1.2 then connect using lan.also use a different browser to connect to 192.168.1.1 if you are using same browser till now.just for precaution clear the cache of browser.if still no success post the result of ipconfig /all again along with ping result(ping 192.168.1.1) in command window(run cmd).

What should be the default password to connect via wireless ? Any thing else I can try ?

Context menu when you click the wifi icon and
and access Wifi network "broadcom"
Connect /Status /Properties.
Select Properties and "show characters."



Para two:

A simple query

Confirm you cannot access in LAN mode also.

you cannot answer in plain simple English. YES NO.
I don't know , whether you get connected to Internet in LAN mode.
and can surf the web sites.
IF "NO" after finding the wifi security key and using it result. will be same.

See post No 18 and give the data:
post the result of ipconfig /all again
along with ping result(ping 192.168.1.1) in command window(run cmd).


3.
Using small quotes like this :
[quote ] when connected in LAN.....[ /quote]
without space will appear

when connected in LAN....

If limited connectivity, I wanted to know whether any web site was accessed.OS Used Windows 7/vista or XPSP3.

I'll try to be more clear this time. Thanks for your replies.

What should be the default password to connect via wireless ? Any thing else I can try ?

---> I am using Windows XP SP3 and have reset the router. I dont have existing configuration and want to know the WEP key that should be used so that I can configure to connect via wireless. This is because everytime it puts me on limited connection.
Firewall is disabled and Proxy is removed. I was able to access 192.168.1.1 before selecting the "Allow below" in Router firewall, after which the problem started.

2) Confirm you cannot access in LAN mode also.

a) NO using dynamic auto assigned IP: I cannot access 192.168.1.1. It assigns me IP 169... and displays limited connectivity.
Ping to 192.168.1.1 returns not found with 100% Loss.

b) NO using static IP: When I configure static IP, it does not give limited connectivity and following is what I get:
Physical Address. . . . . . . . . : 00-1C-26-4C-66-5C
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 8.8.8.8
208.67.220.220

Ping to 192.168.1.1 returns not found with 100% Loss.

Firewall is deactivated. No Proxy Settings on browser.

If limited connectivity, I wanted to know whether any web site was accessed.OS Used Windows 7/vista or XPSP3.

OS specification is as above. Regarding internet, I have unsubscribed from Airtel. So, I do not have internet to be able to load website using router connection. I'm sure there is nothing wrong with browser. (When I connect using USB internet device, I can load every website. The LAN connection adapter is fine as I can access wire/wireless while at restaurants etc).

3.

Reset process

-->I switched on the router with only power cable connected (No LAN/LINE cable)
--> Power LED glows red and after some time WIFI LED Glows Green
-->I press the routers reset button at bottom for ~25 seconds.
-->DSL Light blinks Yellow suddenly and Power/WIFI were continuously glowing as before.
--> I release the reset button and poweroff/poweron the router again.

Is this the right way to reset ? Although, the routers name (as displayed in available wireless networks has changed).

4.

Other options

Should it be good to open the router and look for some other reset there ?
Is there any CD delivered with the router ? I can't find it on beetel's website. Any clue ?

@jay2058

SUMMARY Posts 11 to 20
Beetel450BXI OS XP3 ADSL BB ISP None : USB modem used ISP ??
router RESET> SSID default Broadcom. Security key wanted>


21/1
Give details of USB modem Number/Make ______________________
ISP BSNL>
CONFIRMED
All OK. Internet working Websites accessed. in laptop.

Beetel450BXI RESET.
21/2
Modem/router settings cannot be accessed. 192.168.1.1
ID admin PW password ( default values of Airtel ) confirm YES or NO ?
try ID user PW user.

ref video/screen shots/ links/settings/ etc
see link WA3002-g4 below

21/3

SSID Broadcom
See Post No 19 and get the wireless security key.
confirm value _____________ (*WEP 0987654321 try)

21/4
Why do you want to test Beetel 450BXI is working or not ??___________

Data input from where ?_________________________________

No adsl land line based broadband connection used/ subscribed now.

Feed back item wise.

try reset again but keep pressing the button for ~30-40 sec.see if it helps by repeating all steps suggested above.if still no success try this modem on a friend's computer/laptop & see if you can access or ping 192.168.1.1.

SSID Broadcom
See Post No 19 and get the wireless security key.
confirm value _____________ (*WEP 0987654321 try)

All the thanks dude.

Essbebe rocks! This worked well.

I am able to connect via wireless and navigate to the 1.1 page. I restored my settings as earlier from earlier backup.

However, my LAN access still does not work. It assigns 169... IP and gives limited connectivity. Any clue ? Any option that would make this work ? Any clue on how many users does router support over wireless ? (we have tried max 4)

UPDATE:
SSID Broadcom WEP security key solved.
congratulations.

still
21/4

From Post No 20.

Regarding internet, I have unsubscribed from Airtel. So, I do not have internet to be able to load website using router connection.......

Why do you want to test Beetel 450BXI is working or not ??___________

Data input from where ?_________________________________

No adsl land line based broadband connection used/ subscribed now.???

21/5

However, my LAN access still does not work. It assigns 169... IP and gives limited connectivity. Any clue ?

post ipconfig /all No edit.

Regarding internet, I have unsubscribed from Airtel. So, I do not have internet to be able to load website using router connection.......
Why do you want to test Beetel 450BXI is working or not ??___________

Because I have this router and data card based internet. I have multiple machines that connect to internet. I plan to put a proxy server on one of the machine so that the other is able to access.
I hope this clears why I want to test.

Data input from where ?_________________________________
No adsl land line based broadband connection used/ subscribed now.???

I presume you are asking for source of internet.
-->I need around 2-3 machines (machine 2 & mach 3) to be configured in a network through router. One of this will be on LAN wire... This machine on LAN, (say, Machine 1) already has data card installed and internet is working good.
--> The machines in LAN can use proxy address to communicate to the internet.
--> Problem is that I'm not able to get the Mach 1 on LAN (which does not have wireless card) so LAN is the only option.

However, my LAN access still does not work. It assigns 169... IP and gives limited connectivity. Any clue ?
post ipconfig /all No edit.

>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

>ipconfig /all

Windows IP Configuration

Host Name.........................:mypc
Primary Dns Suffix................:
Node Type.........................:Unknown
IP Routing Enabled................:No
WINS Proxy Enabled................:No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix....:
Descirption.......................: Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-...
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 8.8.8.8
208.67.220.220

The following is how my router configuration looks like.

Local Area Network (LAN) Setup

Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save button only saves the LAN configuration data. Save/Reboot button saves the LAN configuration data and reboots the router to make the new configuration effective.

IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
(Checked) Enable UPnP
(Checked) Enable IGMP Snooping
(Ticked) Standard Mode
(Unticked) Blocking Mode
(Unticked) Disable DHCP Server
(Ticked) Enable DHCP Server
Start IP Address: 192.168.1.5
End IP Address:192.168.1.80
Subnet Mask: 255.255.255.0
Leased Time (hour): 24

Static IP Lease List:

MAC Address IP Address Remove
00:.... 192.168.1.2
00:.... 192.168.1.4 *This is Machine1 MAC address. Note that even if I remove this, behavior is the same.

Please click on Save/Reboot button to make the new configuration effective. (A maximum 32 entries can be configured)

(Unchecked) Configure the second IP Address and Subnet Mask for LAN interface

#########
Other Pages:
#########

Software Version: 3.12L.01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-12.1
Wireless Driver Version: 3.131.35.6.cpe1.0a.s

Device Info - > statistics
Interface Received Transmitted
Bytes Pkts Errs Drops Bytes Pkts Errs Drops
Ethernet 6444 49 0 0 2198 9 0 0
Wireless 207928 1447 0 0 942684 1633 0 0

Diagnostics
Test the connection to your local network
Test your ENET1 Connection: FAIL
Test your ENET2 Connection: FAIL
Test your ENET3 Connection: PASS
Test your ENET4 Connection: FAIL
Test your Wireless Connection: PASS

I am looking for ...

I have connected my LAN port using RJ45 to my computer LAN. I dont know why is the IP is given incorrectly ? And when I configure in 192 domain it says successfully connected but does not allow me access anything.
The firewall on PC is disabled. Do I need to update my wireless software ? What else can I try to get this working.