Thread: Problem in connecting VOIP phone with BSNL ADSLMODEM

Hi :

I have seen lot of useful threads in this blog .. and i am facing a sam kind os issue , could any please help to suggest on the issue i have

I have VOIP linksys SPA-2102 switch bought from starhub singapore , need to connect in to BSNL ADSL MODEL UTstarcom 300ru, But my voip device is not abel to connect in to internet..

Thnx
Ramesh

http://www.inphonex.com/download/spa2102-qi.pdf

your VOIP provider : STARHUB Singapore ?
http://www.starhub.com/content/dam/v...5402SP_IAD.pdf
Similiar Dlink model.
Confirm Internet Ok with computer with LAN cable.

Annexure 164 KB.

Hi :
Thanks for your reply:

Yes its STARHUB SINGAPORE:
INTERNET OK with using LAN cables

Now transfer the Rj45 from computer end to linksys sp 2102.
see these links for settings. Your VOIP provider could be different.
STEP 2
Make sure that in your Network settings is set to 'Obtain an IP Address Automatically'

........Open your browser and enter 192.168.0.1 . This web-based configuration is not passworded........
IP Phone Configuration Guides and Software Downloads - sorted by Manufacturer
Linksys SPA 2102 Setup Guide

http://www.inphonex.com/support/link...figuration.php

see step no 4 and 5 ( select Voice )
and give your VOIP providers details.
if the company has provided any other unit for VOIP use give details.


There will be no connection from BSNL Adsl Modem to computer/desktop/laptop ( give correct model number UT300R2U ???)
to desktop or laptop.
wait .....

Hi :

I have tried connected the the way you told me .but still my SPA is not negotiating with my BSNL modem.

Model of BSNL MODEM:UT300R2U
Attached the properties of both modem and spa switch.

UPDATE
Page 13
New BsnL Ut300r2U may not have Port forwarding options ( advanced options NAT port triggering /virtual server etc in "always On PPPoE mode )
http://docs.google.com/viewer?a=v&q=...c3pQgRWDHC5y4g


ADSL Modem UT300R2U:
(a)
Ensure connected in PPPoE mode :
( In wan page your bsnl UserID ( without @ bsnl.in and PW will be stored in this modem.Internet should start automatically when modem/system switched on.
(b)
Enable DHCP ( In lan page Give range192.168.1.3 to 192.168.1.10 )
(c)
Then check system/ computer/laptop in lan mode with Linksys SPa 2102.
( No conection from UT300r2U to system)
(d)
If possible check laptop( if available) also in wifi mode.
( no connections to laptop )
No VOIP: confirm all fine for Internet working

Para two:
As no extra unit Router supplied by STARHUB
only linksys settings were posted. Select "VOICE"
Phone number etc: given by STARHUB:
When you try to dial telephone number in Singapore ( of STARHUB) what is the ERROR message you get ?

Do you get the distinct Dialtone of StarHub ?
TRY "Tone" mode.

Para three:

The setup is such, once all done properly you don't need computer to be "Always On" to make telephone calls via STARHUB telecom system

Para four :
MY vonage has provided a unit(router) and its settings can be accessed by typing 192.168.15.1.

Adsl modem==>>rj45==vonage unit ===>>> VOIP phone
from vonage unit ===>>> rj45 ==>> .. wifi router==>~~~wifi to laptop.

If internet fails, I get message in Phone "
connection lost to Internet contact your ISP" etc

My telephone number for VOIP is Vonage U.S 9 digit number
( as if I am in U.S and monthly charges paid in U.S )
Same way I expect Linksys to work.
Ignore:
Give details of your STARHUB Telephone connection >
Got Singapore Number ?
Getting stuck in STEP 5 ? Linksys's setup.
http://www.indiabroadband.net/attach...1&d=1301798309
feedback.