Thread: i cant do port forwarding on teracom router

hello everybody
i'm using teracom T1-B-DSL699E9.4U6-5 router.i cant port forward to any port from my router.when i try to forward ports there is an error occur.it says that "webserver: Error adding NAT reserved mapping pool " please help me
Thanks in advance

Switch to Bridge mode and check. All ports are open by default.

You can also try a guide from portforward.com

it is in birdge mode. i already searched on portforward.com they have no info about T1-B-DSL699E9.4U6-5 model
please help

In bridge mode ? Means you are using a dialer and click " connect " to connect to internet ? Strange

Yours is a wifi modem ?

In PPPoE, try this (similar GUI)

Port Forwarding Utorrent on the Nokia Siemens C2110 - PortForward.com

sorry my router was on pppoe mode and screenshots are similar to the link you provide.but the problem is after i do the last step error says


This Product has encountered an error/warning.The same can be seen below. The time displayed are in seconds since the last reboot.

When Severity Error/Warning Description
180137 error-failure webserver: Error adding NAT reserved mapping pool name1@pppoe_0_35_6123123430123123

Go to the " Admin " in LHS panel of your modem, take back up and save it in your computer. It will save the current working set up which you can use to restore any time.

Then try Bridge mode and check.

i saved the current configuration.please tell me how change to bridge mode

In the LHS panel of modem, select " configuration " > Internet connection > select the 0_35 entry , click " edit " > browse through the pages, you will find an option to choose between PPPoE and Bridge.

After changing to bridge mode, you need to create a dialer using your ID and password.

For any time you want to go back to PPPoE, try this guide

Teracom Type-I ADSL MODEM MULTIUSER CONFIGURATION

In "Bridged" mode NO PF needed.
Post as Annexure your PF settings.


for use in forum:
http://www.indiabroadband.net/comput...tml#post315289 (Monitor Screen Shot)