Thread: Any challenge to my connection?!

Any challenges?! :P or else any solutions?

snaps collected on verious days with at least 5 days gap between two.!

Try another modem and select Mod mode GDMT.

Thank u for ur reply. but i guess it wont cause because of modem. modem is new(about 6months old). and i cant use GDMT. i tried it some months ago and it resulted in something weird and didnt get connected. had to reset it.

I think you tried G LITE. appear to be on ADSL2+ now.
Anyway your ATTN d/l should reduce and SNR D/L increase.
http://img300.imageshack.us/img300/246/snrattm.jpg
Check cable connectors for rusting/blackening/high resistance contacts.

2.
ADSL ANSI T1.413 Issue 2
ITU G.992.1 (G.DMT)( * preferred)
ITU G.992.2 (G.Lite)

ADSL2 ITU G.992.3/4
ITU G.992.3 Annex J
ITU G.992.3 Annex L

ADSL2+ ITU G.992.5
ITU G.992.5 Annex M
3.


India Broadband Forum

1.

Couldn't understand anything from your second point.

my connection is, socket>splitter>modem>pc!

uncheck box ADSL2+ and ADSL2
SAVE REboot.
Recheck SNR/ATTN. for reference mine 110BXI similar modem.

Mode: G.DMT
Downstream Upstream
SNR Margin (dB): 31.8 26.0 SNR+5dB
Attenuation (dB): 16.0 9.0 ATTN less 2.5 dB

Mode: ADSL2+
Downstream Upstream
SNR Margin (dB): 26.9 28.1
Attenuation (dB): 18.5 9.9

If connection lost, enable ADSL2.

2. Point 2 > need not understand . same here!
for reference diff mod modes available.

3

.my connection is, socket>splitter>modem>pc!

You can connect direct also. For PHONE USE ADSL splitter. .
Hope you know the difference between splitter and ADSL splitter.

And presume you don't have any phone/s connected to ADSL splitter
PHONE port. or direct to BSNL junction.

tried all other modes, including g.dmt, but even though modem shows connected i dont get any downstream data.. nd a little improvement is value (by 1 or 1.5)