Thread: Connecting WA3002G4 WiFi to Nokia C6

Hello friends ,

I am unable to connect wifi in my nokai c6 through WA3002G4.
I have gone through many threads rewarding this same problem but still I am not able to solve .

I can see a wifi network on my phone as "UTstarcom" which is my modem/router.
When I try it to connect it show "connected" but when i open any website on my phone it shows "Invalid Server" .

Kindly help friends


Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

Change to PPPoE and enter/store your userid in wan page.
Enable DHCP.
Check White list Mac filter disabled in router pages.
UTSTAR WA3002-G4 quick reference

[QUOTE=essbebe;325427]Change to PPPoE and enter/store your userid in wan page.
Enable DHCP.
Check White list Mac filter disabled in router pages.



I HAVE CHANGED TO PPPoE AS MENTIONED IN ONE OF THE LIST,

Port/Vpi/Vci Con. ID Category Service Interface Protocol Igmp QoS State Remove Edit
0/0/35 1 UBR pppoe_0_0_35_1 nas_0_0_35 Bridge N/A Disabled Enabled
0/0/32 1 UBR br_0_0_32 ppp_0_0_32_1 PPPoE Disabled Disabled Enabled
0/8/35 1 UBR br_0_8_35 nas_0_8_35 Bridge N/A Disabled Enabled
0/8/81 1 UBR br_0_8_81 nas_0_8_81 Bridge N/A Disabled Enabled
0/0/100 1 UBR br_0_0_100 nas_0_0_100 Bridge N/A Disabled Enabled
0/14/34 1 UBR br_0_14_34 nas_0_14_34 Bridge N/A Disabled Enabled
0/1/41 1 UBR br_0_1_41 nas_0_1_41 Bridge N/A Disabled Enabled




PPP Username and Password

PPP usually requires that you have a user name and password to establish your connection. In the boxes below, enter the user name and password that your ISP has provided to you.

PPP Username:yes i have mentioned all details here like my user name n pass
PPP Password:
PPPoE Service Name:
Authentication Method:




Check White list Mac filter disabled in router pages.????

how to do that ?

WAN Setup - Summary

Make sure that the settings below match the settings provided by your ISP.

PORT / VPI / VCI: 0 / 0 / 32
Connection Type: PPPoE
Service Name: br_0_0_32
Service Category: UBR
IP Address: Automatically Assigned
Service State: Enabled
NAT: Enabled
Firewall: Enabled
IGMP Multicast: Disabled
Quality Of Service: Disabled

Click "Save" to save these settings. Click "Back" to make any modifications.
NOTE: You need to reboot to activate this WAN interface and further configure services over this interface.

You need to be on PPPoE (Always ON) mode. In this you can connect without a dialer. Simply switching ON the modem will establish the connection to internet.

To do

1. Enable your modem in PPPoE mode

2. Enable DHCP in your modem

3. In the TCP/IP properties of your connection (all machines), set " Obtain IP address automatically ".

If still facing problem,

4. Disable any encryption used for WiFi and check.

5. Make sure that the MAC filter in " wireless " page of modem is OFF.

Thanks dear, yes I am able to use wifi in my nokia c6 now .

Always welcome

added rep++ post no 4.
brief and precise.

Thanks ...............