Thread: Beetel ADSL2+Modem 220BX1 with BSNL Dataone

Hi,

I am trying to reuse Airtel Modem for BSNL DataOne broadband.

My Modem Model : Beetel ADSL2+Modem 220BX1
Location : Bangalore
PPPoE/LLC SNAP connection Settings :
VPI : 0
VCI : 35
User Name for DataOne : xxxxx_yyyy
passwd: *********

problem is : internet is not working.

I also tried to reset the modem and configured from the beginning but no use.

How to confirm that bsnl phone is good and trouble-shooting the modem settings?

I tried to check my bsnl dataone userid/password at bsnl dataone site. Userid and password are fine.

I also want to know whether this Beetel ADSL2 220BX1 + CPE modem is suitable for BSNL DataOne?

Anybody please help me in this regard?

See the following link and check the settings 1 to 14.
Chennai Telephones- Changing password in DataOne Pre-configured modem
( wifi pages to be ignored )
r BSNL broadband:.220BX can be used
Check Diagnostics page and report failed components.
Which modem you use now to connect ?mention model/number/make.?
Check in signature links below.

For use in forum
http://www.indiabroadband.net/comput...tml#post315289 (Monitor Screen Shot)

1. I followed all the configuration steps 1..14 to configure the Beetel ADSL2+modem model 220BX1, ADSL2 + CPE modem. Year Model : 2007, Its a airtel Modem
2. In diagnostics page, its showed only Authentication to ISP -> PASS, and rest of all tests
-> FAILED.
3. Right now I am using any modem, connecting from my friends home.
4. I am unable to get pppoE, and IP address every time its shows ADSL link down on the modem screen.

REcheck specially last three steps.
Wait for two minutes.


Click “Advanced Setup”
Click Edit button against VPI/VCI -0 and 35
Click Next
Select PPP over Ethernet (PPPoE)
type username and password as given to you by BSNL

In the PPPoE Service Name, type a string say “dataone”

Tick the following
Enable PPP Debug Mode
Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled)

Click Next
Enable NAT

ALSO DNS
enter 8.8.8.8 208.67.220.220
and Click Next

Click SAVE
Click Save/Reboot in the above screen
Click Management and choose Save/Reboot
Wait for two minutes.
Feedback.

Option 2:
see Flash method.
http://mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm

In DEvice Info Statistics ADSL data should appear.
Copy/Paste here

Mode: ADSL2+
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 27.3 26.6
Attenuation (dB): 19.0 10.0
Output Power (dBm): 12.4 0.0
Attainable Rate (Kbps): 22684 876
Rate (Kbps): 2042 507

feedback.