Mobile is connected to Wifi but no Internet access

/Hi
I have Beetel 220BX modem and linksys router. My laptop is connected to Wifi and is working fine. When I connect my mobile (Samsung galaxy) to Wifi it says connected but I am not able to browse anything. It says 'Network not available"

I have configured wireless through PPPoE connection only. Can somebody pls help me.?

presume PPPoE you have entered/stored userid/PW in WAn page of
modem.
Enable DHCP and give a range say 192..168.1.3 to 192.168.1.10
Enable UpnP.
Try without security key in wifi mode.
then wep wpa etc.
Mention model number of wifi router.
http://www.indiabroadband.net/broadb...html#post92683

i do not know how to change the security to WPA in my mobile. it doesnt allow me to do so...

my router is linksys 54G

Originally Posted by rbharathram

i do not know how to change the security to WPA in my mobile. it doesnt allow me to do so...

my router is linksys 54G

You will find an option to add or remove encryption in your router's menu page.

i am not able to find any such thing in my router page. This is all i can find in the router page. pls help. have attached the screen shot

This is modem's menu page. You need to get to the router (linksys 54G) menu page.

can you pls guide me how to get the link for linksys router page.

i am typing 192.168.1.1 but it goes to beetel page

How to connect a Linksys Wireless router to a regular Ethernet Linksys router

Check Point No 7. allot IP 192.168.2.1

i have reset my linksys wrh50G wireless router and I am not able to connect to wireless through my laptop also.. can you guys pls help me..

i have reset my linksys wrh50G wireless router......

All factory settings. see Post No 8.
Presume in Beetel 220BXI you have enabled DHCP and given a range
192.168.1.3 to 192.168.1.10
Your wifi router/ other systems/laptop/ desktop etc will have different LAN address/es..
feedback.

My modem type is ASUS DSL N10. I have a laptop and wifi works fine in it. When I connect my mobile (Samsung galaxy y) to Wifi it says connected but I am not able to browse anything. Please help me.


I have posted a new thread with same problem

Originally Posted by kranju

My modem type is ASUS DSL N10. I have a laptop and wifi works fine in it. When I connect my mobile (Samsung galaxy y) to Wifi it says connected but I am not able to browse anything. Please help me.


I have posted a new thread with same problem

I solved this problem by myself. It was solved in a very simple way.
My connection in my mobile said connected with WEP security, while other networks said secured with WPA/WPA2 PSK so i thought i have to change mine to WPA, I logged on the webpage 192.168.1.1, gave admin as both username and password, then in my ASUS DSL N10 modem page, in the right side box – Authentication method – is by default open system, I changed it to WPA – Personal, then WPA Encryption is TKIP and WPA-PSK Key is by default 00000000 (You can change it as needed – should be 8 characters minimum) after making these changes I clicked on save and reboot.
Hence the problem was solved.

I hope this will be helpful for people who have the same problem and those who refer this in future.

hello,

i too have i have asimilar problem, have a bsnl connection with zte 531 wireless modem...i connect to the internet through a dialer.... i am now tryng to connect to the internet from an android phone, have tried changing from bridge mode to pppoe mode, but afer changing to pppoe mode, am not able to connct to the internet from either the phone or the pc.

any suggestions?

thanks

Is your modem in PPPoE mode or in bridge mode ?

did manage to switch from bridge mode to pppoe mode successfully, so pc, laptop and mobile have internet now.