India Broadband

soroccoheaven

hello
I ma having Huawei Smartax MT882 DSL modem provided by BSNL .This modem is connected to a Linksys wireles Access-Point.The whole set up is working fine ..i am able to browse Internet from my pc as well as laptop.
Now The problem is that when i am trying to connect a third PC (which is around 40 Mtr. far from dsl MOdem/Linksys access-point ) to the port (wired) of Linkysys access-point with cat5 cable, i am not able to connect it(port status lights on PC and acess-point blinking and no ip allocated to the PC ),but when i connect the third PC with the cable provided with Linksys i get connection with no problem .The 40 Meter cable I am using is QHMPL CATEGORY 5E UTP FR-PVC NETWORKING CABLE .(This cable is tested and found working in Live lan.I was able to ping other PC's.Now someone pls advice me on this issue..
Huawei Smartax Mt882-
IP address :192.168.20.1
DHCP enabled: Yes

Linksys Acess-Point-
IP address : 192.168.30.2
DHCP enabled: Yes

PC1 -connected to Access-point -
port 1: ip address :192.68.30.X (Dynamic)
Laptop -wireless -iP address 192.168.30.X (Dyanamic)

Now pls advice about this ..
Thanks

soroccoheaven

Problem solved ...thanks

mmm

^ can we know what was the actual problem and how you
solved it ... it might help others having a similar problem .

soroccoheaven

hello
i am having ADSL Huawei smartAX MT882 modem with BSNL 500 plan.
My lan with 2 PC, One laptop and VOIP device

My lan connection as :

modem -->> Linksys Wireless access point (4 ethernet port)--->>connected both the pc's and VOIP device with ethernet ports of linksys.---->>laptop on wireless
My problem was when i was connecting my 2nd pc which is around 40 mtr. far from my modem/linksys with cat 5 cable ..i was not able to connect ..lan status was showing ...connetion with limited or no connectivity..i thought it might be due to faulty cable ..but i tried it on live lan and found cable is ok.
The problem was the lan speed selection i selected 10 mbps/full (it was 100 mbps before/default value) duplex and i got the connection.so the trick was 10 mbps ..what i think is that the ethernet port of my linksys supports only 10 mbps..it need to be confirmed ..i will see it whenever i get some time..