Thread: BSNL Wifi (AR800v 3.0 Modem) Connection with itouch & htc wildfire s

Hi,

I am trying to connect the bsnl wifi on my itouch n htc wildfire s phone.
Both are able to connect to the wifi, with open network or even by providing security key (WEP/WAP etc.) but I am unable to access any web page or web application in either of my devices. The signal strength is execellent in both devices.

I am able to connect to the wifi and access the bsnl broadband without any issues on my laptop.

Please help. I have tried all the PPPoE settings and other things listed in Forums. But nothing is working.

Answered here

http://www.indiabroadband.net/bsnl-b...tml#post331291 (Old problem new solution ?)

Enable DHCP server

DHCP Server is enabled.

everything seems to be ok as far as your router is concerned
on your htc desire log to 192.168.1.1
if you r able to log to 192.168.1.1 then there is no problem with the settings both in ur modem and phone

Originally Posted by monarch139

DHCP Server is enabled.

Delete all Tunnel data in your ipconfig/all data. details not needed.
Appears you are using Dialer mode to connect .
Change over to PPPoE mode ( "always On") and enter your userid/pw in wan page of modem/router.
feedback.

Configure your modem in PPPoE.

Here Are Links To Working Screen Shots

http://imgur.com/RtK7m.png

http://imgur.com/RtK7m.png

http://imgur.com/DVb3I.jpg

http://imgur.com/wwZzE.jpg

http://imgur.com/77c1E.jpg

http://imgur.com/BkKnY.jpg

http://imgur.com/RtK7m.png

In the TCP/IP properties of your modem, set " Obtain IP address automatically ".

Configure wlan settings as follows


http://imgur.com/873od.jpg

Hope this helps!!!

Thanks for all of urs suggestions n Sorry for bothering again n again...bt if I set the PPPoE mode my net stops working altogether broadband & wifi both.
Its like a vicious circle. Once I remove the PPPoE mode from 0/35 and change it bak to Bridging atleast I am able to connect through broadband bt then again my wifi has stopped working completely.
I ve tried changing the TCP/IP Config n everything bt still all waste.
Is there any solution out of this??
How to get bak the wifi n broadband to work normal...leaving apart the htc n itouch issues.

Edit your post No 1 and delete tunnel data for further response from me.
Or delete completely and post as atttachment *.doc

VPI VCI for BSNL 0 and 35.
http://www.indiabroadband.net/attach...ppoe-setup.png
In dialer mode modem selects 0 and 35 and connects
In PPPoE mode it is shown as 0 and 38. so no connection !!!
You cannot have two entries for same link 0 and 35. in modem.

Pleas Chk the attachment. This is the current configuration.
Can you please clarify wat settings to be done for 0/38,0/35, PPPoE & Dialer mode.
Am quite naive regarding this BSNL Wifi & Broadband thing, so pls try to b bit descriptive or if u can explain thru screenshots...tat wud b gr8!

If you want the "Bridged" settings for later use , check option in router how to BACKup settings to Harddisk file.
Not very important now.
If you want you can DELETE all other lines except 0_35. (OPTIONAL)
wait....

Edit this line and select PPPoE in NExt page
Then enter your userId/PW etc.
Screen shots posted in Post No 7 will be useful.
If you want link with screen shots check my signature link Teracom "
https://docs.google.com/present/view...njx_14fhxf7xcf

Para two:
Thanks.Scrolling the page up and down ( with unwanted data )
is a strain for the members
and those interested will see the attachment.

Feedback please.

Awesome.....
Its working now perfectly on my system, n my htc ph too.
yet to chk with itouch bt then no big deal.

Thanks a ton seriously I really appreciate ur efforts!!
U ve made my day!!!

Idk i think over pppoe i don't need to enter username and pw
my pc which is connected with wire to the modem don't need username and pw for browsing net while pppoe ison
means the pppoe is working well
now when i connect my phoe to wifi and thenputany address the page loads like 20-30% and then nothing happen
i have attached pic of my bsnl wan statistics

page loads like 20-30%

1. Which browser do you use on phone ? Try Opera Mini and check.

2. Remove encryption / password and check.

3. Are you able to connect using a laptop ? Try using one and update.

4. Were you ever been able to connect any device successfully to your WiFi ?

Try this guide

http://www.indiabroadband.net/broadb...tml#post325614

as i am on bsnl's router page in routing i see the gateway for oone of the pppoe is 0.0.0.0
i think its for phone
coz for pc its 192.168.1.1 as per the ipconfig /all
i have attached its pic
i have tried with laptop it also don't works on it
pls if youhave skype add me acona380
or fb airtrend
i need help

@airtrend

Diwali greetings.
Follow the settings as shown in this link.
Chennai Telephones- Changing password in DataOne Pre-configured modem

Confirm Laptop gets connected in WIFI mode.

If still problem copy/paste ONLY wlan data from ipconfig /all
( no tunnel data etc ). Mention OS used.