Thread: Configure 2Wire router+modem ?

Hi,

I have a ZTE ZXDL 831AII modem currently. I have got a 2Wire 2700HGV modem+router which I want to use in place of ZTE.

Is it possible to use the 2Wire model as both modem+router with bsnl connection? If yes, then i would appreciate if someone can guide me though the configuration with PPPoe settings.

If not, then is it possible to use the 2Wire model as just a router connected to existing ZTE modem? i would like to know how this can be achieved.

thanks.

2Wire 2700HGV modem+(WIFI) router
Yes. as a standalone unit. fo r the present.
Copy the details as entered in ZTE adsl modem
( Keep present settings and as standby to connect to Internet )
( the menu pages will be different )

and try to connect in Lan mode.
Important vpi/vci for BSNL 0 and 35.
Wireless settings if needed.
If you have Installation CD use it.

or RESET to factory settings and try to connect
in Dialer Mode ( userid/PW entered in system window )

PPPoE mode means "Always On "
(userid?PW entered/stored in modem wan page )


Feedback.
.

Hi,

sorry for the late reply. I tried with the provided settings. For the PPPoE mode, it doesnt take the userid in the normal form (i.e. in a non-email form, which I normally use in the dialer). So, I tried with providing userid@bsnl.in. Then it gives an invalid userid error while setting up. I dont know if I need to register for @dataone.in id for logging in. Attached is the settins I am using. I am not sure if they are correct or not. My existing ZTE modem is not wifi enabled so I couldnt find any WAN page where I can get the stored userid/pw (if different from what I use to dial in).

Kindly advise.

check ATM encapsulation. Now Bridged LLC default
other options? .
Bridged VC-Mux,
Routed LLC, &
Routed VC-Mux.
Try Routed VC mux.
then other two.
MTU 1500 or 1492 Ok.
user id with /without @bsnl.in should not matter.