Thread: help me !! how to port forward?

i have a bsnl type 2 model teracom t2-b-gawv1.4u10y-bi.
i was downloading torrent at speeds upto 200 kbps. but when i re-installed windows xp and intsalled u torrent my downloads speed have come down to 50 kbps. when i ran the u torrent set up guide it displays: result - Port is not open but you are still able to download. can someone please help me to forward port so i can get back to 200kbps.
thank you .

check this:
http://portforward.com/english/route...0/Utorrent.htm

ref
http://www.indiabroadband.net/bsnl-b...tml#post283205 (Teracom: essbebe's compilation)

You need to open the ports first. If still no go, try this

utorrent > options > preferences > connection > Enable UPnP port mapping, Enable NAT-PMP port mapping.

If nothing works, switch to bridge mode and check. In bridge mode, all ports are open by default.

Also if the problem persists, try disable firewall/antivirus and check.

how do i open port? can u show me step by step. i'm new to all this .

Originally Posted by meetdilip

You need to open the ports first. If still no go, try this

utorrent > options > preferences > connection > Enable UPnP port mapping, Enable NAT-PMP port mapping.

If nothing works, switch to bridge mode and check. In bridge mode, all ports are open by default.

Also if the problem persists, try disable firewall/antivirus and check.

how do port forward? can you help me step by step, i'm new to this?
however, i did go to my ip address (portal) and found an option to port forward, then i clicked on add but dont know the next step.
thank you

Use this link

Port Forwarding Utorrent on the Nokia Siemens C2110 - PortForward.com

[QUOTE=meetdilip;336510]Use this link



first of all thank you for the link, but i'm stuck with
protocal/type port start port end port start port end

when i select ALL there is not option to insert port number or should it be blank.

Originally Posted by meetdilip

Use this link

[=//portforward.com/english/routers/port_forwarding/NokiaSiemens/C2110/Utorrent.htm]Port Forwarding Utorrent on the Nokia Siemens C2110 - PortForward.com[/url]

first of all thank you for the link, but i'm stuck with
protocal/type port start port end port start port end

when i select ALL there is not option to insert port number or should it be blank.

Do you get virtual server page ?
.

also enable UpnP
http://www.indiabroadband.net/attach...e-better-6.jpg

Originally Posted by essbebe

Do you get virtual server page ?


also enable UpnP

yes i go virtual server page .thanks will try.. and let you know


ok .. i went to the virtual services and logged in. but there is no option to enable Upnp. i clicked on all the options. i'm also using teracom and not siemens. kindly help me fix this problem.

UpNp : may be: not in your model. FW may be different.
http://www.indiabroadband.net/attach...e-better-6.jpg

hey i got to know about some kind of websites which allow knowing your port forward by doing some tests..

are they safe?

May be. You can always use port checker tool from portforward.com.

Utorrent can also be used to see if a specific port is open (not pre assigned ports).