Thread: BEETEL 110TC1 ADSL2+ Router not connecting in BRIDGE MODE

Hello

I have purchased a BEETEL 110TC1 ADSL2+ Router. The router gets connected in PPPOE>PPPOA mode. But I want to use BRIDGE MODE. I tried t change to bridge mode in router ie 192.168.1.1. But I am getting ERROR CODE 678 while connecting from PC. And also can any body help me to share the internet connection over network using BEETEL 110TC1 ADSL2+ Router and a 8 port switch.......

if you want to use a switch better to have PPPoE connection.
By resetting the modem you will get default 1483 Bridging mode for all PVC's



you are not entering userid/pw properly in "Dialer' page.
8 way switch:
Enable DHCP in the modem >give a range say 192.168.1.2 to 192.168.1.20

in all computers network settings:
Obtain IP address automatically.

check signature link beetel450 TCI below.

Thanks for the reply dude.....Does in Network changing the IP Address settings to ->obtain IP address Automatically affects the File and Printer Sharing and Shared Drives???? I am entering the correct Username and Password... can you please explain in detail to get bridge mode from PPPOE in Beetel 110tc1???

question :I am entering the correct Username and Password... can you please explain in detail to get bridge mode from PPPOE in Beetel 110tc1???
Answer:
wait
see this link. Screen shots from my working Beetel 110TCI.
http://mybroadbandforum.com/beetel-1...e-1-t2846.html
In first screen select " Bridging" last box. no other changes.


There is confusion about PPPoE and "bridged " :\"Dialer" etc
When you say "bridged" (1483 bridging option in this model)\
you cannot normally enter userid/PW in the modem page.
You use a separate Dialer window in computer
and enter id/pw to connect.
PPPoE . system connects automatically to internet.

Obtain Ip adddress automatically will not afffect other systems, connected in the LAN.