Thread: Connecting only through username and password

I can only connect to the internet by using windows i.e my connection will not start as soon as the modem is switched on. I would have to connect to it like a dial up connection by entering by username and password, This was fine until i recently tried to connect a router but its not working, is there anyway to make my connection normal and i can be able to connect to the internet without using username and password?

Mention your modem - model and make.It seems you are in dialer / Bridge mode. Configure it in PPPoE mode. Net will connect as soon as you switch ON the modem (takes a few seconds to connect to net).

I have dareglobal DB 108 ADSL Model, how to make it connect through PPOE mode?

And i cant even go to "192.168.1.1" page in my modem, i tried resetting it also! :O

Log in to your modem. From the LHS menu, take WAN or similar page. In this page you can see a 0/35 entry. Click the " edit " button. Now you will find various options. You need to set them according to PPPoE mode.

For Eg.

New Page 1

This may help

http://www.indiabroadband.net/broadb...tml#post284804 (192.168.1.1 No access !)

Chennai Telephones- Changing password in DataOne Pre-configured modem
same menu pages ( ignore wireless pages)

When you are connected to Internet
http://whatismyipaddress.com
type this in addresss bar.
modem access window will open.

Sorry to ask but where can i find "Network LAN properties" in my PC? I use Windows7

Network and Sharing center > Change adapter settings > select your connection > Right click > Properties

confirm you have changed to PPPoE mode from "bridged" mode.
switch off modem/ switch on and confirm connected automatically.

Thanks guys!
Can go to the modem page now!

I can use the net without connecting manually now

Thanks for helping me out guys! []

To connect automatically you need to be on PPPoE mode. Try link in post no. 5

Warning: In Windows 7 delete the Wanminiport dialer. or disable it.
confirm how you accessed modem settings

I accessed modem settings by putting "192.168.1.1." in default gateway in Network settings

From Post No 1

.and i cant even go to "192.168.1.1" page in my modem, i tried resetting it also!

:

After resetting:
May be the default factory Ip address was 192.168.1.254.
( for information. will verify later))