Results 1 to 7 of 7

Thread: AN1020-21 modem wi-fi not working

  1. #1
    Junior Member
    Join Date
    Aug 2011
    Liked
    0 times
    Posts
    3

    Default AN1020-21 modem wi-fi not working

    Hello,
    -By referring to the other posts on this forum, I have configured AN1020-21 modem for my BSNL connection.
    -But the problem is that the internet works only when I use the data cable. -The wi-fi still doesn't work.
    -Can someone help me make the appropriate wi-fi settings for this modem.

    Thanks in advance.
    Sanjay

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    QUICK FIX !

    Probably you have not disabled the white list
    ( which needs MAC address input ) Try without any security key.
    Disconnect lan cable when wifi being tried ( except with OS Windows 7)
    Confirm you use PPPoE mode Not "bridged"
    ( former system connects automatically to Internet. No dialer used.
    2.
    D.I.Y Do it Your self from guides etc.



    3.
    INfo feedback needed
    (a). Presume at least the SSID is seen in your laptop.
    (b)Mention OS used.
    (c)If needed post ipconfig /all for ONLY WLAN connection.
    ( Please delete all Tunnel data if seen )

    Procedure
    Start RUN type cmd
    OK
    New window
    type ipconfig /all
    Copy/paste data here.

  3. #3
    Junior Member
    Join Date
    Aug 2011
    Liked
    0 times
    Posts
    3

    Default

    Hello essbebe, thanks for the reply

    Am using Windows 7

    - MAC - whitelist is disabled
    - Tried disconnecting LAN cable but not working
    - Am using PPPoE mode

    - SSID is seen on my laptop
    - Using Windows 7
    - Will post iconfig/all data in the evening as soon as I reach home

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    Also check Channel 11 is selected.

  5. #5
    Platinum Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    8,555

  6. #6
    Junior Member
    Join Date
    Aug 2011
    Liked
    0 times
    Posts
    3

    Default

    Hello essbebe,
    The wi-fi is enabled now. Thank you.
    The only config missing was channel selection which was in auto mode, i changed it to manual and chose channel 11 which worked perfectly fine.
    Now the concern is that its a non-secured wi-fi access because I have removed all encryption. How to solve this problem? How to make it password protected?

    One more thing. My two laptops and ipod are catching wi-fi easily and also allowing net access. But my mobile (Nokia E-71) detects the signal but does not connect to internet(error-web gateway not found). Is there a solution for this.

    Thanks again.
    Sanjay

    Hello Dilip,
    I used this information to configure my type II modem.
    thanks
    Last edited by sanjuiyer77; 08-11-11 at 08:35 AM. Reason: Automerged Doublepost

  7. #7
    Platinum Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    8,555

    Default

    Welcome

    Try this for WiFi ( has similar interface)

    Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Error 619 Bsnl 3g
    By chanx in forum Bsnl 3g
    Replies: 41
    Last Post: 02-05-12, 06:17 PM
  2. Bsnl ZTE modem stopped working suddenly !!
    By anandrmedia in forum BSNL broadband
    Replies: 12
    Last Post: 07-07-11, 07:39 AM
  3. bsnl 3g disconnecting every 380-400MB..
    By joshiparas in forum Bsnl 3g
    Replies: 8
    Last Post: 06-14-11, 07:50 PM
  4. modem not working properly
    By bcom in forum Reliance Broadband
    Replies: 2
    Last Post: 09-14-10, 05:06 AM
  5. Replies: 8
    Last Post: 09-11-10, 10:07 PM