Thread: HElp with configuring BSNL modem(DNA a210bei) with linksys wireless modem wrt120n)

Please help with connection my wireless linksys router to my bsnl dsl modem
2.How do i activate DHCP on the modem
3.Can i use static ip instead.

1.DHCP box usually seen in lan page.
2.give range192.168.1.2 to 192.168.1.10
3.Your "STATIC IP" is usually 192.168.1. X ( X= say 2 to 10)
4.Connect in PPPoE mode . In modem
( select PPPoE in WAN page next next Enter userID/PW)
( refer wa3002-g4 link below for screen shots. confirm same )

PARA TWO:
WRT120N:
Connect rj45 from modem to WAN/Internet port of wifi router/
Another rj45 from LAN1 to computer ethernet port.
Access router menu pages . default IP ID PW in unit's label.
usually 192.168.0.1 admin admin.

In lan page give new Ip address for say 192.168.0.1
try default settings.
(1)http://www.pcwintech.com/files/scree...rt120n/000.png
all default values Change Time zone for India Save settings

(2) Wireless page Change ssId name only ch 11. Save settings.
http://www.pcwintech.com/files/scree...rt120n/001.png
(3) wireless page : try without any security key. Save settings.
http://www.pcwintech.com/files/scree...rt120n/002.png
4.
(any problem post status page.)
http://www.pcwintech.com/files/scree...rt120n/015.png
5. Check in LAN mode. If Ok remove rj45 from computer
6.
and try wifi mode.

Feedback. ITEM WISE.

well i did acess the DHCP setting page on my modem but their isnt anythin visible were i can do these changes as u hav mentioned

This page ?

http://www.pcwintech.com/files/scree...110bx1/002.png
or this ?
wait:
http://www.indiabroadband.net/attach...1&d=1313159621

Sorry i hav found the DHCP setting on the wy to gettin it fixed

You did not bother to confirm the modem page of yours,
out of the two I posted !!!!
Hope you get the setup fixed up !