Thread: reconfigure bsnl wifi modem

earlier i used to connect to internet by first putting in my username and password and dialing it
then i bought a new wifi mobile which wont connect to my wifi bsnl modem
then i read this post

1.
Please change over to "Always On" mode PPP/PPPoE
In WAN page un check "bridged" select PPP/PPPoE box
next enter userid ( without @bsl.in ) and PW
(In lan menu page mostly) enable dhcp range 192.168.1.2 to192.168.1.20
Management Menu: SAVE Reboot. wait for two minutes.

2.
See post no 7 by @meetdilip.

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".
3.
Please confirm your WIFI is working in your laptop.
The same network name should appear in your phone
4.
Post ipconfig /all for WLAN wifi network.
5.
Check link wa3002-G4 for screenshots.
http://www.chennai.bsnl.co.in/BBS/WA...eless_security
__________________
WA3002-G4 QUICK GUIDE : =lists 18 modems 57,750+33,800 hits
BSNL LINKS* *Usage details* *TERACOM 15300 hits *Beetel450TCI*192.168.1.1

and did changes accordingly
now my internet connects automatically without dialling username and password
but now i want to reinstate and go back to previous state where i used to put in username and password before and then connecting to my internet

Simple . Open WAN setttings page .Uncheck box PPPoE.
Select "Bridged" SAVE REboot.

You may like to SAVE/BACKUP present settings PPPoE mode
to say C:/My Documents/PPPoE mode working.
SEE in Management /Back up menu.

Your wifi mobile will not work when you are in "Dialer" Mode.
Feedback , if it works.

hey can you tell me in detail
which column
0/32 or 0/35
there are so many columes to edit
which one should i

For BSNL it is 0/35.