Thread: bsnl modem problem

I have bsnl UT200R2U modem..It worked fine for 2 years.
but now after 10 or 15 minutes usage the connection terminates automatically.and the PC/USB shows RED light.
I cant connect it again.
It connects after a day.then again disconects..whats the problem?
I reset the modem.but nothing happend.

..Also my modem is so slow to powerup nowdays.

check the lan wire, i too had faced the same problm with the same modem, finally i got a new teracom modem (ADSL+wifi) from BSNL for which i paid 1500.

BTW welcome to IBF

Originally Posted by blackbox009

I have bsnl UT200R2U modem..It worked fine for 2 years.
but now after 10 or 15 minutes usage the connection terminates automatically.and the PC/USB shows RED light.
I cant connect it again.
It connects after a day.then again disconects..whats the problem?
I reset the modem.but nothing happend.

..Also my modem is so slow to powerup nowdays.

1. Get a friend's modem, change password and user name, try on your line and check.

2. Check splitter / ethernet cable. If you have a spare, use it and see.

3. If you have USB cable (and drivers ) use it and check.

i have win7

every LED is fine
but data LED is steady after I reset the modem
cant connect even with admin ,admin.
error 651.

also ping 192.168.1.1 shows no error

Error 651

Recheck userId and password entered in WanMiniport dialer.
Create new network for "PPPoE" Always On connection.
( YourBSNl userId/PW stored in wan page of modem)
RESET the modem ( with power on for about 10 to 30 seconds )
Factory settings restored.
Then try 192.168.1.1 admin admin
IF
menu pages are not opening
THEN
in Computer
START RUN type cmd
OK
New window.
type ipconfig /all
check the default for modem.
then try
use this link to enter data
The little I know about Dataone Broadband Services offered by BSNL
confirm connected to Internet.

Check your power adapter. could be faulty. ( due to aging
power celectrolytic capacitor would have become leaky )

I configured as you said...

but the same error
no problem with adapter and modem(i think).

Then why?

Copy/Paste data only for LAN connection.
( No tunnel data if seen)
ipconfig /all

Now i can connect...
but i tried 4 or 5 times to connect

Windows 7 Error 651 Modem Ut300r2U

Now i can connect...
but i tried 4 or 5 times to connect

There is no hurry to post your reply.
If No response is received in the forum, you can send PM
Private Message to any member who responded here giving the link )

SMS type messages do not help.
Compose your reply in Notepad and then copy /paste here.

Para two:

confirm:

(a)You can connect using the Dialer ( enter ID/PW in system Dialer window) No errror 651 now
or
(b)
connects automatically ( PPPoE mode ID/PW stored in modem)

(c)
From modem/router Deviceinfo/Statistics/ ADSL
Post screen shot as Jpg attachment here.
Or extract: Mention mod mode selected. ADSL2+ GDMT etc.

SNR Margin (dB): 28.1 28.4
Attenuation (dB): 19.0 10.0
Output Power (dBm): 11.9 0.0
Attainable Rate (Kbps): 22732 876
Rate (Kbps): 2042 507

(d)
copy/paste ipconfig /all data
ONLY LAN ( No tunnel data)
In Computer

START RUN type cmd
OK
New window.
type ipconfig /all

Reply item wise.

for use in forum ( Ignore if familiar)
http://www.indiabroadband.net/comput...tml#post315289 (Monitor Screen Shot)