Thread: beetel 450tci problem

i hve purchesed one beetel450tci adsl 2+router i configer every thing now dsl and internet led is displaying but cant get internet

this is the details of my configration
net details.JPG

net details 2.JPG

net details 3.JPG

activate"bridge interface" also.
select "always ON" box ( screen shot No 2 )
feedback please

i follow ur instrection if i select bridge re i cant alwys on option now my internet led is not showing only dsl if restart current setting its outomaticaly going to
pvc 0 frm pvc 2

last 1.JPG

last 2.JPG

last 3.JPG

You should not select Bridged.
I meant the box in same page.
"bridge Interface" Ok ignore this .
If connection not working select.
Select PPPoE "Always ON"
feedback.

In this modem all PVCs will show snr etc Only WAN page no entries. BSNL you have selected VCO2.
Other VCo's will also show same snr/attn etc. No WAN

sir now internet led showed but cant use internet se the screen shot

new.JPG

new 2.JPG

new 3.JPG

enable the box bridge interface.
below your ID /pw

Also MTU to default 0

pls explain sir how to do

select the button and


then enter MTU 0


SAVE
try.
wait... for screen shots

feedback.

i make to 0 but still same problem after i make to bridge in that time internet led light gone still cant use interne sir have any firmware ver problem

Always check status page
In the end ADSL status. When changes made always CLICK SAVE.
Try only MTU. You should remain on PPPoE
In my modem bridge interface is selected.
http://www.indiabroadband.net/attach...1&d=1314544288
CHeck DNS:
http://www.indiabroadband.net/attach...1&d=1314544554

dear sir i hve check as u told me but cant find my problem se my screen shot

new4.JPG

what dns you have entered ?

Post Status page/

sir now i entered same like u b4 it was empty

new4.JPG

last 5.JPG

218.248.246.1 INDIA - - 28.635308
77.22496 - +05:30
Net Speed ISP Domain
DSL NATIONAL INTERNET BACKBONE BSNL.CO.IN

enter this in primary or google 8.8.4.4SAVE

From computer:
Start RUn type cmd Ok
New window
type ipconfig /all
copypasteONLY LAN data ( No tunnel data )


SPI disabled .

SAVE

Also try MSS 1400 MTU 1480 ( details from another working computer )
Always report what ADSL ( last entry) status page.
shows. earlier itwas PPPup
should show connected.

Dear sir i hope my my problem this i marked in the screen shot how to change it and one problem also after done this work i restart current settings after restarting its frm pvc 2 into pvc 0 i show u the screen shot here

my configration status

me.JPG

This is working modem status

interface status 2b.jpg

this is after restart

old.JPG

In this model, there are selections called buttons.
You just click again to uncheck and click another button to check.
in "access management" settings
http://www.indiabroadband.net/attach...1&d=1314587454
ACL and CWMP both boxes. deactivated. SAVE ]
Delete entries url ip id password etc .

Your pictures not readable.improve.Cut blank portions of screen shot.

Select PVC 0 Select Interface setting click button deactivate.
Repeat for all except PVC2 vpi/vci 0 35 Bsnl.
SAVE.
post status report. of all PVC's
select PVC2 with VPi/VCi 0 35 click the next button.
You will get a picture showing status of all.

http://www.indiabroadband.net/attach...1&d=1314588901




If you have wifi does the SSID Airtel or Mngmt appear in your laptop ?
network settings WLAN

dear i hve change as u told me but same problem

pvc.JPG


why its not save wich i selected pvc2 after restart current settings its gone

In PVC0 and PVC1 change to 1483 Bridged. and deactivate the PVC's
Presume you Click SAVE when ever any settings are changed.
Only PVC2 with vpi/vci 0 and 35 PPPoE mode should be connected.
Do not use button from "current settings'.

After all settings made close browser and restart.

Your pictures are unreadble. remove blank portions and enlarge for readability.

why its not save wich i selected pvc2 after restart current settings its gone

Post connection status for PVC2.

Clear your temp files cache etc.
use ccleaner from http://filehippo.com



Just try WiFI mode ( if your system has WLAN)
post the error message.

Dear i did as u told me but still cuntinuing my problems

new 1.JPG

new2.JPG

new4.JPG

do you have wifi mode in your laptop/desktop ?
Post ipconfig /all data.
Post again LAN screen shot. (readable)

can change Firmware, as last resort , but wait.

Sir i have laptop ,wr cani get ip bcz im not using ip address i hope its firmware problem pls support how to upgrade firmware its under warranty if i upgrade firmware any problem underwarranty

You should give info I ask.
Firmware upgrade: If purchased from market don't try.

Willing to try at
own risk?
PPP up is OK.
All your settings Ok.
Post wifi page
I want to check the error message. in wif mode.
Also extra options in LAN page.
Needed:
Status page
Lan page
Wif page
ipconfig /all data ( except tunnel data )
I got a 450TCI now but ADSL connection is down. Unit faulty.
( No snr ATTN details ) testing still.
update 110TCI adsl modem + 450TCI working in wifi mode(.TESTING)

Sir i dont know how to take ip iddress this is the data other

lan.JPG

wifi.JPG

status.JPG

see post no 14. for ipconfig /all procedure.

this is ip address

ip.JPG