Thread: UTSTARCOM WA3002G4 Modem Issue !!!

Hello Folks,

I am having problem with UTSTARCOM WA3002G4 modem. I am trying to access modem page "192.168.1.1" but it says incorrect username or password. I never changed anything before. I tried to look for reset button but couldn't find it in this modem.

Kindly help me to solve this problem.

Thanks in advance.

Regards,

Vas

OPTION 1 :

in computer
Network
LAN
properties
New window net work settings
/select/highlight tcp/ip4 box
properties
New window
type 192.168.1.10
255.255.255.0
192.168.1.1
Apply Save.
try again.

OPTION 2 :
the RESET usually a small hole in rear of unit near power socket
If not in the bottom a round hole near . right leg.
( all others will be square ( ventilation etc )
http://www.indiabroadband.net/attach...1&d=1314796413
Press with power on for about 10 to 20 seconds with an used ballpen refill !!
You can use a new Ball pen refill also !!!
Check my signature link for resetting modem/router data.

Option 3:
signature link 192.168.1.1 details to access modem ONLINE.

Feedback.

I am having problem with UTSTARCOM WA3002G4 modem. I am trying to access modem page "192.168.1.1" but it says incorrect username or password. I never changed anything before. I tried to look for reset button but couldn't find it in this modem.

After reset (if you have no other option), use this links to configure your modem back to working condition

UTSTAR WA3002-G4 quick reference

http://www.mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm#yes

Dear Friends,

Thanks for your quick reply. I will try and will reply with results.

Cheers,

Vas

Usually user name for accessing modem
USERIDadmin PW admin or password. ( if modem supplied by AIRTEL)
( if you had changed them earlier and cannot remember either , only RESET will restore factory defaults ). No other way.

Dear Friends,

It is working fine. Thanks a lot for your help.

I am having the following versions in modem:

Firmware Version: WA3002G4-0021.01

Software Version: 1132_061507-3.08L.BSNL_02.

May I know what is the difference between Firmware and Software version?

Where can I get latest version for both?

Cheers,

Vas

Always welcome

Firmware update should be done only if there is any particular reason for it. It is not like Windows update which we do to be fail proof. Also if done wrongly, it will damage your modem permanently. It is recommended to continue with pre installed firmware.

Also go to " management " (last option in LHS menu) and take a back up of your modem settings. You can later use this and restore your modem settings. It will help you to avoid reconfiguration in similar conditions.