This is a discussion on Configuring DataOne on Airtel220bx - new thread within the BSNL broadband forums, part of the Broadband Internet Service Providers category; Device Info...
| |||||||
| BSNL broadband Bsnl broadband internet connection and modems, routers and other bsnl dataone related issues can be discussed here. |
| LinkBack | Thread Tools | Display Modes |
| | #11 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | Device Info |
| | |
| | #12 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | Normally this comes: ![]() Sometimes (for 5-6sec) this comes and in log, I can see that the connection is UP, us:234,ds:256 |
| | |
| | #13 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | DNS Server config shows like this: ![]() LAN Setup is as following: |
| | |
| | #14 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | Default Gateway: ![]() WAN Setup: |
| | |
| | #15 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | WAN Status: ![]() Now to troubleshoot.. Is there any problem with my splitter or modem? Sorry for the LOOOOOOONNGGGG Reply |
| | |
| | #16 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 5,775
Rep Power: 13 | @arindam_b only onescreenshot posted properly. beetel airtel/dataone wan//i23.tinypic.com/23mm2x.jpg beetel AIRTEL SETTINGS type http to see image only two pics allowed! Beetel Dataone settingsNote time in device status. Simply changed the ADSl input. NO other changes in MODEM. I can connect either Airtel or Dataone with single modem now. See the differnce in bandmeter at top and Datafox reading for Dataone |
| | |
| | #17 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 5,775
Rep Power: 13 | beetel AIRTEL SETTINGS |
| | |
| | #18 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | Is it because of the OS? I am using XP and I do have another WIN2k3... I am thinking to get the 2k3 installed afresh and try again! I think you are using 2k3...right? But my amber light is not glowing steadily.. I think the problem might be with splitter. I will first try to get my hands on a new splitter, and then probably..if all fails.. I have to roll out 1800K to buy a new modem!!! Poor Smeagol.. gollam... gollam!!!! |
| | |
| | #19 |
| Junior Member Join Date: Aug 2007
Posts: 21
Rep Power: 3 | Essbebe asked me to look into the LAN Card... if it is working properly. I will see the device info from device manager.. but I think it was ok..as far I remember.. It was showing Realtec NIC interface and all... Then also I was adviced to uncheck automatic DNS for modem and check automatic DNS from LAN tcp/ip properties and do all sort of combinations. I will do that too and report back tomorrow. If my LAN card is faulty, I will go to USB mode. Lets see.... what happens! I had a tata indicom modem also back in hyderabad, which I have ordered back to kolkata. It will arrive EOW, but it was only the modem... no splitter. I will check with that too! WHY THE HELL IS MY LINK LED NOT STEADY??? |
| | |
| | #20 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 5,775
Rep Power: 13 | Best Idea : Go to BSNL telephone Exchange and get a modem on rent only Rs 60/pm. They give you the modem fully programmed for your ID always on connection. . Test your Internet connection works ok. Then try Beetel or Tata modem etc. Get connected. There could be telephone line trouble. Noisy. Remove the connections and check for oxidisation( blackness etc ) quote Why the xxxx is my link LED Not steady Unquote Splitter : Any splitter will do no special splitter for each ISP. From the splitter ONLY the PHONE and parallel phones cordless etc MUST be connected Also check up whether the good old static filter is in your telephone junction box and bypass it. |
| | |
| Tags |
| airtel220bx, configuring, dataone, thread |
| Thread Tools | |
| Display Modes | |
| |