Port Forwarding

Hi folks,
I am connected to the net via a dlink (GLB 502T) modem and a netgear wifi router (WGR614). I am able to connect to the net etc etc. But i am unable to port forward it.

When i am using PFPortChecker it could not ping to my pc.

can anybody give any direction in this regards.

thanks in advance...

edit:
and to add i have added the ports i wanna forward in the netgear setup. but still nothing

I am connected to the net via a dlink (GLB 502T) modem and a netgear wifi router (WGR614). I am able to connect to the net etc etc. But i am unable to port forward it.

When i am using PFPortChecker it could not ping to my pc.

can anybody give any direction in this regards.

thanks in advance...

edit:
and to add i have added the ports i wanna forward in the netgear setup. but still nothing


Check portforward.com . They have guides with screen shots.

will update later.

@ meetdilip - have already done that. have downloaded PFPortChecker from there only.

@essbebe - thanks. will wait for your input.

Are you in this page for PF ? Check custom PF option .
http://portforward.com/english/route...T/Utorrent.htm
http://www.indiabroadband.net/attach...1&d=1315970348
http://www.indiabroadband.net/attach...1&d=1315970382

Post screenshot with entries made . Also custom port forwarding .

Hi Essbebe,
I checked Allowed Incoming Ping and added the necessary ports. Previously i only forwarded the ports in the netgear admin setup.

I could get the pings from PFPortChecker, but still couldnt connect my custom apps. but atleast, hopefully, i am done on this part.

Thanks again.

Please post screen shots editing the page suitably. ( same way i had done )
You are not even mentioning which application you need to Port forward!!

A picture is worth thousand words.

For use in forum, if needed

http://www.indiabroadband.net/comput...tml#post315289

Hi Essbebe,
pls find attached some pics (i am yet top 15 posts thus couldnt format the pics in the post itself).

i am connected to a pc (lan) and a laptop (wifi).

while i am able to connect to the pc without any issues the laptop is having issues.

i am trying to connect 2 custom software. actually a winform server and a silverlight and/or winform client. all the set up is working fine if i try to assign an private ip (like 10.0.0.2 or 10.0.0.3 in the client as the case may be). but things go haywire when i am assigning an public ip (59.93.**.***).

thanks.

try modemIP 192.168.1.1in wifi router.
Even if PPPoE disabled in WIFI router ,
Port will open, because of Modem setup.
feedback.

Originally Posted by essbebe

try modemIP 192.168.1.1in wifi router.
Even if PPPoE disabled in WIFI router ,
Port will open, because of Modem setup.
feedback.

if i understood you correctly then it wont let me do the same. throwing ip conflict error. also i have to reconfigure the whole set up (port forwarding etc).

Originally Posted by essbebe
try modemIP 192.168.1.1 in wifi router.
Even if PPPoE disabled in WIFI router
error: should be Portforwarding
Port will open, because of Modem setup.
feedback.

If I understood you correctly then it wont let me
do the same. throwing ip conflict error. also
i have to reconfigure the whole set up (port forwarding etc).

Try your port forwarding set up only with GLB502T. for application/s.
Keep the MAIN GATE OPEN.
Disconnect Netgear from the system set up.

Better not involve in all sorts of theory.
Try .
Report failure or improvement.

for my reference :My wifi router.
http://www.indiabroadband.net/attach...1&d=1316022132

thanks Essbebe,
will fiddle the network over the weekend and let you know.

http : // www . codeproject . com/KB/IP/chandrasekar.aspx
my sample server socket is in line of the above mentioned project. it is working fine in the private environment, but not in the public environment.

thanks again.

attached the exes from codeproject.com

You may need another adsl modem with DDNS menu item.
could see the link here.
http://www.xmarks.com/site/www.codep...ndrasekar.aspx
also here.
http://www.codeproject.com/KB/IP/chandrasekar.aspx

hi,
are you refering to the ddns client such as dyndns etc. if so then it already has it.

the links are the same which i gave you. it dosent mentions anything regarding ddns etc. am i missing something.