Thread: Tp-link

I just brought brand new TP-LINk ED-W8951ND, i need to know how to setup nat and what number to give on nat page.

http://i1191.photobucket.com/albums/...inojb/shot.png

for utorrent/torrent:
click on virtual server.there select rule no. 1 from index,type application name.in front of that if there is a box which provides options like FTP,SSH,Telnet etc in drop down menu then leave it blank.in protocol select ALL,select same start port & end port which you have defined in your utorrent settings(e.g.30000).enter local IP address of your PC(like 192.168.1.3 make sure to set this IP as fixed in your PC LAN settings).click on save & your rule 1 for torrent is set.

in your pic virtual circuit is shown as PVC2 which should be PVC0.in modem there are many virtual circuits starting from PVC0 to PVC7(usually).it is recommended for home/normal users that PVC0 is set for internet while other PVCs should be disabled/deactivated.this can be done in interface setup-->internet setting in my TP-LINK wired modem.

Just see that i followed your steps
1.http://i1191.photobucket.com/albums/...ojb/sshot1.png

2.Next, http://i1191.photobucket.com/albums/...ojb/sshot2.png

At last, when i tried to run test in utorrent its says that Port is not open(you still able to download).

Firewall in my router is turned on. is that i need to turn it off.

in utorrent settings check port to forward is 44575 & also in your LAN status details check your pc local IP is 192.168.1.3.if everything is correct then don't check port using utorrent port checker.instead check by actually start downloading a torrent preferably with large no. of seeds/peers(usually latest movie/tv episode).

Thank u for ur help. Now utorrent says that all port are open(I just turnoff firewall in my router).
I need to know whats the use of port forwarding.

you should not have to turn off firewall to enable port forwarding.modem/router firewall provides an extra layer of security so it is not recommended to turn it off.in advanced setup--->firewall setting enable firewall & disable SPI(my setting).utorrent should work.

ya you are right port forward works when i turned on the firewall in router

what is DMZ, QOS and vlan?

DMZ is DeMilitarizedZone & when it is enabled it allows all incoming connections on all ports directly to your PC.it is only recommended if you run a web server.

QOS is quality of service.it helps in prioritizing data packets.e.g.if you want to give higher priority to VoIP over web traffic.

VLAN is virtual LAN & it is used to create a group of devices on different LAN networks act as if they are on same LAN network.it is generally not used by a home user.

Thanks for your reply

In these models The PVC's cannot be deleted.
Default all in " 1483 Bridged " mode.
You can select any and change the VPI/VCI
If already entry is there against PVC2 vpi vci 0 and 35
it can be used.





2.
When PVC0 is selected , you may get an error message
duplicate vpi/vci not allowed and will have to change PVC2 to some random figure .
When modem is accessed Device Info/Status will normally show PVC0 first.
I have similar models Beetel 110TCI and Beetel 450TCI

ya i knew it , when i tried to change vpi/vci value in pvc0 it shows an message duplicate vpi/vci not allowed . Then i use pvc2 it works fine.

when i buy this router the sales man says that don't plug your router adapter to inverter or ups outlet. why?