Thread: D-Link DSL-2520u configuration for BSNL Broadband

Hi,

I have bought a D-Link DSL-2520u modem to use with BSNL boradband. I have configured it. The diagnostic test result shows the status 'Test with supplied IP:FAIL'. All other are shown as PASS.

The Power,Lan, Dsl indicator lights are green, Internet indicator light is red and Status light is off.

Please help me to resolve this.

Thanks,

Manu

Recheck with screenshots in this link. Ignore Part II wifi
http://www.chennai.bsnl.co.in/BBS/WA...eless_security
VPI/VCI 0 and 35 for BSNL.
confirm you are using PPPoE'Always On" mode
( userid/PW stored/entered in WAN page )

Attach as *.doc ipconfig /all

Hi essbebe,

I have read the post having your reply [link: indiabroadband.net/bsnl-broadband/29257-dlink-glb-802c-router-config-problem-day-1-a.html ]. My problem is same. I have also contacted D-Link customer care and they advised me on MAC binding and asked to contact BSNL people. My modem is DLink DSL 2520u.

Thanks,

Manu

This modem has around for more than 5 years with different names and Dlink has just now added to the list. with their brand number . ( UT300R2U/Beetel220BX/Beetel110BXI ( mine now ) etc.
see signature link wa 3002-g4 also.
New Page 1



Try 192.168.1.1/main.html for advanced options.
If you are using Dialer mode switch to PPPoE mode
( enter userid/PW in wan page )
Post as screen shot Device info. or copy/paste data.
wait.
Device Info

Board ID: 96338L-2M-8M
Software Version: 3.12L.01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-0.7

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 507
Line Rate - Downstream (Kbps): 2042
LAN IPv4 Address: 192.168.1.1
MAC Address: 00-1e-40-ba-cc-44
Default Gateway: 117.193.32.1
Primary DNS Server: 218.248.255.147
Secondary DNS Server: 218.248.255.146

Check this page default Mac filtering No entries.
If you are On PPPoE'Always On" mode no effect.
http://www.indiabroadband.net/attach...1&d=1321553037

Hi essbebe,

Here are the screenshots.












This is the D-Link customer care reply:
ISP,s in india started binding MAC addresses from last year as cyber cell ask ISP's to control the user datbase.and ISP,s also want to control the no. of users. it is also a security mechnisam..
we faced many issue regarding the same MAC binding issue.

Thanks,

Manu

UPDATE: Check PM

Please Recheck WAN settings ( In Advanced options )
Obtain IP address automatically button to be selected.
or report WAN status here. Also check MTU value.


DEvice Info route:
Destination Gateway Subnet Mask Flag Metric Service Interface
117.193.48.1 0.0.0.0 255.255.255.255 UH 0 br_0_35 ppp_0_0_35_1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 br0
0.0.0.0 117.193.48.1 0.0.0.0 UG 0 br_0_35 ppp_0_0_35_1

Device Info -- ARP ( Yours shows U.S IP 128.9.0.107
UNITED STATES, CALIFORNIA, MARINA DEL REY)

IP address Flags HW Address Device
192.168.1.3 Complete 00:04:E2:44:AC:23 br0
192.168.1.4 Complete 00:1D:BA:1C:4A:18 br0

I think manupal is in bridge mode and that is why the person who is belong to this id manupal and also a human-being and using DSL-2520u to fulfill broadband facility get failed at "test the assigned IP address"

Originally Posted by manupal

Please help me to resolve this.

Use pppoe setup.

@Indranil

Use pppoe setup.

From my Post No 4:
Try 192.168.1.1/main.html for advanced options.
If you are using Dialer mode switch to PPPoE mode
( enter userid/PW in wan page )
Post as screen shot Device info. or copy/paste data.

Fom Post No.5


Please explain this.

My problem is resolved. I took the modem to BSNL office and they configured it immediately, now it is working fine. The problem was related to MAC address binding, as pointed out by D-Link customer care personal. Thanks for all co-operated.

Congrats:
You may post screen shot of menu page where MAC binding has been done. to help other users. you can blank the address
example: 00:AF:XX:XX:XX:XX
Also revised ARP page. for this ;