Thread: Internet Gateway

I am using a UTStarcom WA3002g4 broadband modem from BSNL. Though the internet is working absolutely fine, I am not able to view the internet gateway when I go into the My Network Places page. It only shows the modem. Please tell me how do I get the internet gateway.

I am using a UTStarcom WA3002g4 broadband modem from BSNL. Though the internet is working absolutely fine, I am not able to view the internet gateway when I go into the My Network Places page. It only shows the modem. Please tell me how do I get the internet gateway.

Any particular requirement with internet gateway icon ?

Mention your OS. I have seen the icon, not sure if in XP or Windows 7.

Click the icon ( near battery icon ) status. Windows 7 Pro.

not clear:
You need this data ?
192.168.1.1 admin admin
Device Info

Board ID: 96338L-2M-8M
Software Version: 3.12L.01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-0.7

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 507
Line Rate - Downstream (Kbps): 2042
LAN IPv4 Address: 192.168.1.1
MAC Address: 00-1e-40-ba-cc-44
Default Gateway: 117.193.48.1
Primary DNS Server: 218.248.255.147
Secondary DNS Server: 218.248.255.146

I am using Windows XP SP2 and the requirement of the internet gateway is to view my webcam feed, which is being used as a monitoring device (CCTV) at home, from a remote location. The webcam software is by Yawcam and it requires the internet gateway in order for me to be able to access the feed from a remote location.
- (1330hrs/23-11-2011).

Me too tried YawCam. You can access it by by IP I think. Or by a custom URL which you can share with anyone. Give it a try.

Normally gateway will be 192.168.1.1. You can set this on TCP/IP properties of LAN card.

I'm not too clear as to how that custom URL is to be set up. Could you please guide me thru it or direct me to a place that has step by step instructions for the same??

- (1417 hrs / 23-11-2011).

Try enabling http as shown below



Check their help section.

Current IP Check
when connected to Internet check.
Retype it in address bar.
Do you get a window for modem access/?

REF:Chennai Telephones- Changing password in DataOne Pre-configured modem

2. Probably you may have to make settings for Portforwarding/virtual server

3.

@meetdilip
http://www.yawcam.com/screenshots.php
Your web cam access similar to this?. Only In IE (Remote 6 cameras)

: Which ports are used by Yawcam as default?
A:

Yawcam uses port 8888 for TCP traffic and port 8081 for TCP and UDP traffic.

Q: How do I forward ports in my router?
A:

Please visit Port Forwarding Guides Listed by Manufacturer and Model - PortForward.com
for more information on how to forward a port. Click on the name of your router and follow the guide.

Q: I have a dynamic IP that changes every time I restart my computer. Can I do something about it?
A:

Yes! Follow the instructions on
http://www.yawcam.com/help/noipguide.php

Originally Posted by essbebe

@meetdilip
Yawcam - Screenshots
Your web cam access similar to this?. Only In IE (Remote 6 cameras)

hi essbebe, we can use any webcam with YawCam.