Thread: BSNL modem UTStarcom WA3002G4 is UPnP compatible or NOT-?-.

I am unable to find 'UPnP' listed anywhere in the 'set-up' to enable it. And hence have my doubts about it being a 'non-UPnP' device.
Can someone clarify-?-. Thanks. [1718hrs/26-11-2011].

Depends on the version. Look for the button in menu page.....
192.168.1.1/main.html admin admin
Advanced Setup LAN settings.

What version are we talking about? And where do i look for it??? User manual (on the CD which came with the modem) does not mention anything about this device being UPNP enabled. Please guide me on the same.

- [1737 hrs / 26-11-2011].

Did you open the LAN page as suggested ?

Yes I am on the LAN page now....what next??

Yes I am on the LAN page now....what next??

Post as screen shot ( jpg) as attachment here the page.

( GoAdvanced/ scroll down/ Attach files / Manage Attachments/ Upload)

One version;

I just checked the version on our modem and its exactly the same as you have sent.
Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.


Line Rate - Upstream (Kbps): 493
Line Rate - Downstream (Kbps): 1996
LAN IP Address: 192.168.1.1
MAC Address: 00-1b-57-f3-e1-ed
Default Gateway: 117.192.96.1
Primary DNS Server: 218.248.255.141
Secondary DNS Server: 218.248.245.1

And hence have my doubts about it being a 'non-UPnP' device.

Mention purpose.

It is has UPnP option, but it is better to use port forwarding if it like allowing certain applications to access net. UPnP is a considered as a security risk by some experts.

If you are particular about using the option, check pages on the left hand side menu on modem home page.

Sorry. Checked the model with same FW version. in the web.
BSNL has modified the FW seems to have deleted the option.


WA3002_G4
软件版本 V53.4.01.01
固件版本 1132_061507-3.08L.BSNL_02. ( *Software version )
CFE 版本 1.0.37-8.7
IP 地址 192.168.1.1
MAC 地址 00-1b-da-29-a8-a9
软件编号 T2Z-4C-001 firmware version
编译日期 Fri Jun 15 11:32:05 CST 2007
上行速率 (Kbps) 507
下行速率 (Kbps) 2044





From my Beetel110BXI ( less wifi )
http://www.indiabroadband.net/attach...1&d=1322318539

Purpose of enabling the UPnP option is to gain remote access to my machine through the internet. I have checked all the pages on the modem's home page but I do not see the UPnP option anywhere. Could you please help me in finding it??

Check the screen shot above. The it is in LAN if it is available in your modem. If not, try a firmware upgrade or try other methods.

Purpose of enabling the UPnP option is to gain remote access to my machine through the internet.

Mention what is the intended result. There are many programs which gives remote access to your PC even without changing modem settings. Even Windows has builtin remote support.

UpNp option available in this version.

Device Info
Board ID: 96338W2
Software Version: 3.12L.BSNL_01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-12.1
Wireless Driver Version: 4.170.16.0.cpe2.1sd1

软件版本 V89.2.01.01
软件编号 TJM-18-002 ( * Firmware version )
次版本号 V03
SVN版本 .
编译日期 Sun Aug 30 18:23:04 CST 2009
固件版本 3.12L.BSNL_01.A2pB023k.d20k_rc2 ( * note below)
CFE 版本 1.0.37-12.1 .

sNOTE:Similar to Beetel 450BXI. or mine 110BXI

Well, I now know that this router is not UPnP enabled and port forwarding is the only option. But since I am not that good technically, is there some way you could guide me on how to perform this operation???

You can specify which application you have in mind.
for Torrent downloads ? Utorrent Bittorrent etc.

or for wifi link to smartphones etc ?
Hope you are connected in PPPoE mode
( USERiD/PW entered/stored in modem. Also enable DHCP in lan page )

The one app that I intend to use is Yawcam. Its a webcam software and you can see my requirements on my thread that was posted on the 23rd Nov 2011, called Internet Gateway. Yes I am connected in PPPoE mode and the DHCP is enabled.

Manor
You can use DMZ option to open all port, you do not need to be headache on it.
If you do not need to share your internet with other computer then use PPPOE from desktop.

If you need security and want to open only the specific port then follow the essbebe's step which he will guide you.

@manor
Why you did not continue in the same thread ?
http://www.indiabroadband.net/bsnl-b...tml#post348340 (Internet Gateway)

Para two:
FAQ of the company has answered all your doubts !!
http://www.yawcam.com/help/help_upnp.php
Remember: If you run into problems with the UPNP function you can always forward the ports manually instead.


Wait for @meetdilip's suggestions, who is using the same webcam.

similar setup with more cameras;

I have been through a number of documents and followed step by step approaches as well but I am not able to arrive at the results that are required. Request you to guide me through the manual port forwarding procedure in order for me to be able to access my Yawcam setup from a remote location over the internet. Thanks in advance.

@ Manor, please do refer to previous threads while asking continuity questions. Hope you understand it will be difficult for us to remember every query raised by members. It would have saved you a lot of time.

These may help

The Default Port Forwarding Guide for the UTStarcom WA3002-G4 - PortForward.com

The Default Port Forwarding Guide for the UTStarcom WA3002-G4v2 - PortForward.com

Choose the one matches your modem.