Thread: configure router tp link td-w8901g

i had a tp link td-w8901g .. i had bsnl broadband connection.. i am able to connect wifi with laptop and can use internet.. also i am able to connect modem with my android mobile phone.. but i cannot access internet.. pleaze anyone help..
i am attaching different pages of router configuration..
pleaze help..

In first screen shot, change ISP to dynamic and check.

This may help

http://www.indiabroadband.net/broadb...tml#post325614

Also, remove the first screen shot as it shows your user ID to avoid misuse.

If nothing works, remove password or use only machine and try.

i am able to connect wifi with laptop and can use internet.

You could surf download etc ?
Taskbar wifiicon shown no connection ( yellow mark)
Did you enter your ID/PW in all PVC's ? and PVC2 is set 0 and 35 ?

AnywayTRY
Change VPI/VCI 0 and 35 for BSNL.
Deactivate other PVC's to avoid confusion.
Dynamic Ip already selected.

All other settings correct.


Check in Status Device info. You can test/set LAN mode also in laptop.



IN Firmware update menu SAVE/Backup working current settings as rom file.


Feedback.

REF :similar models
http://*******************/index.php?...4&topic=5394.0
14059

Change PVC0 to PVC2

http://i1191.photobucket.com/albums/...nojb/sshot.jpg

see the Device info. PVC2 might have been deactivated.
PVC0 working for BSNL.
In which PVC VPI/VCI is entered is immaterial, so long duplicate entries are not made.
From working router.

hey thanks everyone... it workz...
i have activated PVC2 and set vpi and vci as 0 and 35 respectively... and in the wireless configuration page, i change the channel to 11.. it workz for me.. thnkzz....

hi frnds , can u plz help me i have a TP LINK modem router TD-W8901G. i have absnl wimax plan at punjab. i can use LAN with this modem but i fail to use wifi on my laptop or on my phone can u peolple send me the configure for it and also send doc commands to check the properties of wifi on my laptop

i will be very thankfull to all of u

with regards:
Amrinder

See attachment No 1 in Post No 1
http://www.indiabroadband.net/attach...-internet1.jpg
(1)
For all PVC's select DYNAMIC IP and activate them.
(2)
In same Post No 1 other settings same as in the pictures.
Wireless page set up as usual.


IN the Router Reboot from current settings.
Check
IN Post NO 5 Screen shot. You may not get snr ATTN etc. NOt connected also. All PVC"s DOWN !

2.
Now connect the Rj45 from wimax to LAN1
Connect another RJ45 to desktop.
Check whether internet works ( Log in if required )
Then check in laptop SSID appears and you connect to internet.

3/. Feedback.

can any one tell, what to do in country's name.
bcoz india isn't there in the list of country's.??
and what is the present vci and vpi no. for bsnl.