Thread: binatone modem is not working on BSNL

hi guys
i have a BSNL broadband connection
i recently take a binatone modem from my friend to use the wifi facility to connect my phone but i dont know how to configure it
can you plz tell me each step how to setup this modem
direct plug and play is not working
plzzzzz help

Check the video for settings here.
http://*******************/index.php?...4&topic=5394.0

BSNL vpi/vci 0 and 35. Select PVC2 and deactivate rest.
Confirm model no DTW.845W.

yes i have hai DT 845w modem

and i tried all this settings but it didn't work

see the screen shots

and one more thing i want to ask

what to write in that username and password did the BSNL gave me that when a got this connection 3 years ago or i can write anything in it

Confirm BSNLOld modem make/number and confirm you get connected to Internet.


2.
You are almost connected !
Use the USERID and PW which you used for BSNL
( In PPPoE mode entered stored in the router)


In Advanced settings deactivate ACL and CWMP.
Also select in LAN page OUI/IPTV blank index nos. ( *not sure if this is needed )

Deactivate all PVC's except PVC2 vpi/vci 0 and 35.

Reboot from current settings.
Wait for the slide to show re booting.

Another solution suggested:
Change Firmware, if all fail.



Feedback.

REF: Old FirmwareW/O CAS IPTV
http://122.166.105.80/Firmwares/Bina...0and%20CAS%29/

Try bridge mode(dial up mode)

Check MTU value ( In Internet page). Is it default 0 or 1500? try 1492. or 1460.