Thread: Need help on wifi router for BSNL Broadband

HI GUYS
I need a help from you.
I am having a bsnl broadband and currently using a wired D-Link ADSL Router.

Now I want to buy a wireless router.
The issue that while searching for wireless router I found that most of the wireless router tech specification reads that WAN PORT of router is RJ-45. So how can I connect my phone line to RJ-45 WAN PORT.

Please help.

ADSL router setup ( Mention model number DSL502-T ?) .

No Change except,
( You have to connect in PPPoE mode ( enter/store ID/PW in modem )
Enable DHCP.
The Rj45 cable from ADSL Modem will go to WAN port of a Stand Alone Wifi router. Another Rj45 from LAN1 to desktop.
~~~ wifi mode for laptops/phones etc.
2.
How to select a wifi router.

http://*******************/index.php?topic=4978.0

H25/14372

Hi essbebe
I just posted a reply but don't know where it gone... anyway thanks for your help.

So do i have to use my both routers ( old wired and new wireless to make it work?

So do i have to use my both routers ( old wired and new wireless to make it work?

Give details of the modem and wifi router. Model/make/number.

Old wired router is BILLION ADSL ROUTER ( wan port not RJ-45 )
and I am going for this one - Netgear WGR614 Wireless-N 150 Router

Please suggest...

Billion can be some 5200S . ( find the number and give details )
Sample/Example Page : Confirm

India Broadband Forum

ADSL MODEM

(1)Ensure you connect to Internet and can surf web sites.
(2) In the modem find a menu item Backup
(3) Back up present settings to say C:/MY documents/ Billion working
(4) Access menu items and change to PPPoE mode
(5) Enter/store your userid/PW in wan page.

(6) Enable DHCP in ( Lan page?) give range say 192.168.1.3 to 192.168.1.10
(7) Save Reboot.

(8) step 1. System should connect automatically.
(9) remove RJ45 from computer end and connect to WAN Port.
of WGR614V10.
(10) another RJ45 from LAN1 to computer

WGR614V10 wifi router

USE Installation CD or

(11) Basic settings Answer No etc.
(12) Advanced LAN change Ip address to 192.168.2.1
(13) Wireless settings
(14) Check Router status. ( Post screenshot as attachment )
(15) Check desktop works in lan mode
(16) Check laptop works in wifi mode ( No cable connection )

Feedback.

] screenshots etc
http://www.indiabroadband.net/bsnl-b...idge-mode.html (Netgear N150 DGN1000 in Bridge mode)
guide
India Broadband Forum

HI essbebe
It reads Model BiPac 5200s
So do i have to keep both the router (old and new one) ON ( power on)

Both
Bipac5200S ADSL MODEM + WIFI Router WGR614V10
should be ON with present set up.

If WIFI router not needed ( switch off ),
Remove Rj45 from Netgear WAN port
and connect to Computer( desktop)

Switch off modem when not required.

Keep Computer On to work without internet.

Hi essbebe
Thanks a lot for your help.
To my understanding it seems like that I have to keep both the routers on for internet access.
Basically I want to use only a single wifi router. I think for that i have to get a ADSL ROUTER with RJ-11 PORT. Is it true..

Or can you suggest a ADSL wifi router ( so i dont have to keep my old modem/router on too ). I am limited on budget( Rs. 1500 ) around.

I appreciate.

Please see link in Post No 2.
a 3 in1 model which you want costs about Rs 2000/=
TEST
In your laptop ( connected to Billion 5200S) download application
"Connectify" It will work as an AP (Access point) for other laptops/ cellphone etc.
( No wifi required )
Or
In Desktop ,insert a PCI WLAN card ( cost about Rs 1000/=) for same "Connectify"

Hi essbebe
Thanks a ton for all the help.
It really helped

My doubts have been clear.
I'll keep you posted once I decide with the wifi router.

Thanks again.