Thread: Help me How to Configure Airtel Beetel 220bx ADSL Modem with BSNL DATAONE connection

Hi Guys,

I have previously an Airtel Broadband Internet Connection unlimited plan proived by Beetel 220BX ADSL 2Modem (no usb drive) now recently i took BSNL Broadband connection with 625plan unlimited i have Winodws 7 operating system on my LAPTOP i tried all the setting possbilities in WAN by changing VPI = O and VCI = 35 by Selecting PPP over PPOE by going thru the guidlines mentioned in India BroadBand forum and my Diagnostics report is showing almost failed please guide/help me on this.....

follow this link ( ignore wireless pages )
Chennai Telephones- Changing password in DataOne Pre-configured modem
feedback.

mine is basic beetel 220bx asdl2 modem (no usb support and also wired modem) please help me...

Menu pages are same . did you see the website and screen shots?
see the guide wa3002-g4 below.

OK.
Just try this.
Open menu pages and RESET to factory settings.
Use Dialer in system and try to connect .
( assuming all PVCs 0-35 0-32 1 -32 etc are present.)

feedback.

for ref :
Screenshots:
http://mydataone.net/router/utstar300r2unew.html
step by step:
http://www.calcutta.bsnl.co.in/dataoneinstall/mu04.html

Diagnositics report is showing almost failed is that i need to update by firmware?

was the model in working condition earlier.?
Software Version: 3.12L.01.A2pB023k.d20k_rc2 latest.
Which LED is not glowing /


Start run type cmd Ok
New window
type ipconfig /all
Copy/paste data here or attach as *.doc
[ go advanced/scroll down/ attach files/ manage attachments/upload
2.
Are you checking 1_32 or 0_35
br_0_35 Diagnostics
Test the connection to your local network
......................

Which ones failed ?

yes it is in working condition.

Test the connection to your local network
Test your ENET(1-3) Connection: FAIL
Test your ENET4 Connection: PASS

Test the connection to your DSL service provider
Test ADSL Synchronization: FAIL
Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL

Test the connection to your Internet service provider
Test PPP server connection: PASS
Test authentication with ISP: FAIL
Test the assigned IP address: FAIL
Ping default gateway: FAIL
Ping primary Domain Name Server: FAIL

Give software version.
and Ipconfig /all data
Confirm you are using PPPoE mode ( BsnlID/PW entered/stored in wan page )

yes it is in working condition.

All LEDs light up ?

check yours :
Device Info

Board ID: 96338L-2M-8M
Software Version: 3.12L.01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-0.7

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 512
Line Rate - Downstream (Kbps): 2048
LAN IPv4 Address: 192.168.1.1
MAC Address: 00-1e-40-ba-cc-44
Default Gateway: 117.193.48.1
Primary DNS Server: 218.248.255.147
Secondary DNS Server: 218.248.255.146