Thread: BSNL/UTSTARCOM UT200R2U Modem Firmware

I have BSNL/ UTSTARCOM UT-300R2U Type I Modem modem purchased in January 2007. Please tell me the site where new Firmwares of this modem is available for download. The image of modem is attached with this thread.

for {ref}
http://mydataone.net/dialer/utstar300r2u.html

From device info or connection status
get the hardware version and software version.
Please mention. the details and the need for FW upgrade.
You are likely to make the modem USELESS by trying FW upgrade.
2.
Any problem you have , with this Adsl modem.members can try to suggest
solutions.

Device Information
Firmware Version: R1.00B02.3AS.BS

LAN -Ethernet
MAC Address 00:18:02:FE:AF:15
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
LAN -USB
MAC Address 00:18:02:FE:AF:15
IP Address 192.168.1.2
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
WAN
Virtual Circuit
Connection Connected
IP Address N/A
Subnet Mask N/A
Default Gateway N/A


I want to setup always on connection. thats why I thinking about upgrading the firmware

Device Information (Square) UT300r2U
Firmware Version: R1.00B02.3AS.BS
Are you using the USB port ? Gateway 192.168.1.2 ?
Firmware upgrade NOT required.

Convention : Modem/router ip address 192.168.1.1 LAN access
USB port access 192.168.1.2
System computer address usually starts with 192.168.1.3 onwards

Step 1 :
Since you are going to make changes in the modem menu
1.Go to menu page and under Tools select Backup
Save current modem settings to a file in your Hard disk.

Step 2:
Select HOME WAN PPPoA/PPPoE or PPPoE and
enter userID/PW in modem page.etc.

similar page; for reference; vpi/vci 0 and 35 for BSNL

Save REBOOT.
switch off modem .

Step 3 :
Restart modem.
You should connect to Internet automatically in PPPoE ( "always On ') mode.

Feedback>