Thread: PPPoE dialer not working but internet is connected

I have BSNL Dataone Broadband connection on a Windows XP PC . The modem is Huawei WA3002-g1. The PC had a virus problem sometime back after which the windows partition had to be formatted.

Now the Internet is being shown as connected, ping is working, but browser can't browse the web in Windows xp. I am also using Ubuntu Linux in another partition the same computer and there broadband is working fine.

Please help.

Huawei WA3002-g1
Windows XP PPPoE dialer Internet no browsing
Ubuntu LINUX: all Ok.

TEST
Disable "1483 Bridged" In Internet page . Select PPPoE etc.
SAVE. Reboot from current settings.
Feedback.

Thanks for your reply.

I did as advised by you. Now web can be browsed . Broadband is being accessed through the LAN dialer itself . PPPoE dialer is not working . It shows Error 678. I would prefer connecting to the internet with a PPPoE dialer and have a separate dialer for LAN. Is there a way it could be made to work ? Please advise.

Since your ID/PW stored in modem/router Dialer will not work.
Presume system connects automatically to Internet now. No dialing needed.
If you need Dialer mode use another modem. set for "bridged " mode
Error 678 . remote server did not respond.
1.
Mention OS
2.
In firmware Page select SAVE current settings to ROM file ( to Hard disk )
3.
Reset modem in 1483Bridged mode( Only Change in Internet page)
SAVE Try again.
4.
CHeck Diagnostics Page. Post only error setting.

5
.Also Copy/Paste ipconfig /all
when in Dialer mode.

Para two:
for NU auto schedule downloads
type Pcgyan in search box for an auto scheduler
http://www.indiabroadband.net/bsnl-b...tml#post333094 (BSNL NU Schedulers)

If you need Dialer mode use another modem.
Mention OS

Will the current modem no longer work in bridge mode so that Dialer can be used ? In case something goes wrong with the BSNL BB connection the technical people at BSNL ask for the error code ( eg Error 678 - remote computer did not respond ) and this code is displayed by the PPPoE Dialer only and not the LAN dialer.

The OS is Windows XP SP3.

@soumyarc

I did as advised by you. Now web can be browsed . Broadband is being accessed through the LAN dialer itself . PPPoE dialer is not working . It shows Error 678. I would prefer connecting to the internet with a PPPoE dialer and have a separate dialer for LAN. Is there a way it could be made to work ? Please advise.

You CANNOT set Both "Bridged" mode and "PPPoE" mode in SAME modem for line 0_35 VPI/VCI 0 and 35 for BSNL.



2.

The OS is Windows XP SP3.

Do you get an ICON in Task bar for LAN dialer ? Do you click it to connect to Internet ?

Do you get this window in either mode ?


If it works in PPPoE "Always On" mode ( userid/PW stored/entered in modem), should work in "Bridged" mode also.
For this you have to again change settings in WAN page and try./test.

The ipconfig/all report is as follows


Windows IP Configuration

Host Name . . . . . . . . . . . . : home
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8102E Family PCI-E Fast E
thernet NIC
Physical Address. . . . . . . . . : 00-E0-4D-9D-EE-2A
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.33
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Lease Obtained. . . . . . . . . . : Monday, January 23, 2012 2:44:23 PM
Lease Expires . . . . . . . . . . : Thursday, January 26, 2012 2:44:23 PM

PPP adapter BSNL:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.93.245.157
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.93.245.157
DNS Servers . . . . . . . . . . . : 218.248.241.5
218.248.240.79
NetBIOS over Tcpip. . . . . . . . : Disabled



In the PPPoE dialer mode the internet is being shown as connected in the icon but ping is not working for websites like google, yahoo etc. Please help.

Huawei WA3002-g1
Windows XP PPPoE dialer Internet no browsing PPPoE"Always On" Ok.
Ubuntu LINUX: all Ok.


Option A:
IN Network==> LAN==>Properties==>>TCP/IP IPV4==>>Properties
Enable: Obtain IP address automatically
or
Option B:
in modem
Check DHCP range ; say 192.168.1.3 to 192.168.1.10
Feedback.

Enable: Obtain IP address automatically option selected.

How do I check DHCP range ?

Could anyone please explain or give useful links to a newbie on how to configure Windows XP SP3 OS with Huawei WA3002-g1 modem in Bridge mode ? Thanks.

http://mybroadbandforum.com/beetel-1...e-1-t2846.html
DHCP in LAN menu page.
http://www.calcutta.bsnl.co.in/dataoneinstall/mu08.html

Originally Posted by soumyarc

this code is displayed by the PPPoE Dialer only and not the LAN dialer.

What is LAN dialer