Thread: bsnl broadband disconnects while connection shows connected

well i have win 7 64 bit. during night time when i leave for downloading,net disconnects while connection in network and sharing centre shows connected. i have bsnl 500c. my snr and attenuation values change continuously in about 10 to 30 sec. whats the problem? i am very annoyed where to complain at bsnl they are all illiterate.

Downstream Upstream
SNR Margin 19.5 15.6 db
Line Attenuation 13.0 11.5 db






after 5 sec

Downstream Upstream
SNR Margin 20.9 21.1 db
Line Attenuation 13.0 11.5 db

after 5 sec

Downstream Upstream
SNR Margin 20.7 22.5 db
Line Attenuation 13.0 11.5 db

Change Mod mode and re check. Disable adsl2+ adsl2 one by one .
Save Reboot. recheck SNR/ATTN

what is mod mode? my modem is iball.

Check under Advanced settings /options ADSL.
SAVE.
Reboot from current settings ( under Firmware)

some screen shots
http://mybroadbandforum.com/viewtopic.php?f=64&t=2846

in advanced settings adsl mode is set to auto sync up options are adsl2+, adsl2, g.dmt, t1413,t.lite which one to choose among these?

i have set to adsl2+ values are changing now also

Change Mod mode and re check.Select GDMT Annnex A.
Save Reboot. recheck/post SNR/ATTN.
Ensure all Phones connected ONLY to ADSL splitter PHONE port.

there are two options adsl mode and adsl type i set them to gdmt and annex a and at that values were n/a. i think problem is with line many times link went off

when i say this to person responsible for net they say modem is faulty as they dont know anything about these and i purchased new modem 2 months ago.

do you get this?

Give data for snr/attn for GDMT adsl2 and adsl2+

on adsl2+adsl2+.png

on adsl adsl 2.png

on gdmt G DMT.png

Confirmed connection lost when GDMT t413 and G lite selected.
( similar modem)
Post FW version of your modem given on top.

here it is 1.png

Wanted what is shown on top of the Status/ Device Info page.
Anyway you can try Beetel 110TCI FW upgrade AT YOUR OWN RISK

USER Manual
http://www.iballbaton.com/Download/4...er%20Guide.pdf

1.png

well i am not going to buy as i bought this two months ago only

please tell me is there problem in line?

How you have connected the phones ?
All phones ( extension phone if any also ) should be connected after ADSl splitter.

Check your present Dynamic IP and post it here to check your modem settings.
http://checkip.dyndns.com/

or check mine. ID admin PW password. Active PVC2
117.193.xx.xx ( * edited/deleted at 1838PM)
Now new DYnamicIP!!!!

i have connected phone after splitter but the line which is coming to splitter is connected directly to phone line(black wire which comes from pole) can that create a problem? well i cant post ip address like this

well i cant post ip address like this
My IP available for ten minutes to check all menu pages.
Tea break !!!

here it is how it happens 1.png

this happens everytime i schedule for night unlimited

Same problem here

Click the network Icon check StATUS and diagnose ( windows 7)