Thread: Port Forwarding.. Modem: UT300R2U.. OS: Windows 7

Hello,

I changed my plan to 1350BB from Feb and when I checked the torrent speed, it was about 390kB/s-400kB/s. But Utorrent tests indicated that "Neither NAT-PMP nor UPnP is enabled. Check your preferences".
Also, the icon at the bottom indicates that "No Incoming connections. Unless the icon turns green... ". The torrent which I tested was Ubutnu OS. But then, sometimes, I see variations in the speed. It reaches 380, then comes back to zero, then gradually rises back to full speed then falls down again... So, I don't know if its the torrent traffic or my connection.
Another thing is that the speeds have never reached above 230-250 when I download anything from the browsers.

For UT300R2U modem, I know that in order to forward the ports, I need to change DMZ host to the IPv4 address of my computer. And I've seen that IPv4 is usually 192.168.1.2. However, when I checked mine, it is 192.168.0.101 and I am not able to change DMZ host into this IP. When I do it and reboot the modem, everything changes to the factory settings(or the bsnl settings.. idk).. So, when this happens, the user name changes to "multiplay" in the advanced settings and I've to change that back. Even the DNS changes back from Google to some other stuff, and the DMZ resets to null. So Am I missing out something here? Is this the way to do the port forwarding?

I tried using the software from Portforward.com but it doesn't have UT300R2U listed in it. .. So, I need some help with this.

Thank you.
PS:

Check in your modem tr_069 client is enabled. if so disable it.
SAVE /Mangement SAVE/Reboot wait for 2 minutes.
try again. Multiplay should not appear again.

Probably your model may not have Under Advanced Options

192.168.1.1/main.html
NAT Virtual server /port triggering options.
DMZ will be seen. confirm.

http://portforward.com/english/route...1/Utorrent.htm

Originally Posted by essbebe

Check in your modem tr_069 client is enabled. if so disable it.
SAVE /Mangement SAVE/Reboot wait for 2 minutes.
try again. Multiplay should not appear again.

Yes, I had seen that in one of your posts and I disabled it.. I'll let you know soon after I try changing DMZ host again

Originally Posted by essbebe

Probably your model may not have Under Advanced Options

192.168.1.1/main.html
NAT Virtual server /port triggering options.
DMZ will be seen. confirm

I see only DMZ under NAT.. Anyway, I'll try to do it manually as shown in the given link below, however I don't know what modem I should choose when it has only two modems listed under UTStar in the software that I download for forwarding.
And, thanks a lot.

Originally Posted by essbebe

Port Forwarding Utorrent on the Beetel 220BX1 - PortForward.com

I did it again. I set up the static IP, but then on the router page if I change the DMZ host, it goes back to "multiplay" even if it is disabled under "management". The DMZ gets changed to 192.168.0.0 ..

What should I do?

In the modem go to MANAGEMENT settings
Backup/SAVE current setttings to say C:/My Documents/multiplay modem
RESET to factory/BSNL defaults.
Make menu settings again.
Check DHCP range. (LAN menu say 192.168.1.3 to 192.168.1.10)
Disable TR-069 client.
Port forward option without using DMZ.
SAVE REBOOT.
Feedback.

ref: similar modem menu pages.
http://portforward.com/english/route...1/Utorrent.htm

Originally Posted by essbebe

In the modem go to MANAGEMENT settings
Backup/SAVE current setttings to say C:/My Documents/multiplay modem
RESET to factory/BSNL defaults.
Make menu settings again.
Check DHCP range. (LAN menu say 192.168.1.3 to 192.168.1.10)
Disable TR-069 client.
Port forward option without using DMZ.
SAVE REBOOT.
Feedback.

ref: similar modem menu pages.
Port Forwarding Utorrent on the Beetel 220BX1 - PortForward.com

I followed the steps like you've said but whatever changes I make with the multiplay disabled, it changes back to bsnl settings and goes back to multiplay again. So to get it back working, I have to keep it enabled, and change user name and pass.
And I lost you on "Port forward option without using DMZ" ... Do you mean, I should follow the steps given on portforward.com?

These are the settings when it goes back to multiplay. Otherwise, the default gateway is usually 117.192.*.* and I use google DNS.

Board ID: 96338L-2M-8M
Software Version: 3.08.BSNL_02.01.02_tr64.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: UT300R2U.0011.01
Hardware Version: UT300R2U 2.2
Model Name: UT300R2U

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 493
Line Rate - Downstream (Kbps): 3998
LAN IP Address: 192.168.1.1
Default Gateway: 10.239.6.1
Primary DNS Server: 218.248.255.139
Secondary DNS Server: 218.248.255.141

Confirm "Multiplay" ID is for accessing modem menu pages.
Default Gateway: 10.239.6.1 Explain this IP address.

Originally Posted by essbebe

Confirm "Multiplay" ID is for accessing modem menu pages.
Default Gateway: 10.239.6.1 Explain this IP address.

Hey essbebe, I didn't get what you said.. That IP address is the one which i see when everything resets to multiplay..

That IP address is the one which i see when everything resets to multiplay.

.

IP Address: 10.239.6.1 Share this result
Location Unknown
Latitude, Longitude 0, 0 (0°0'0"S 0°0'0"W)
Connection through PRIVATE IP ADDRESS LAN
Check in LAN page 10.239.6.1 is entered.


Enable Upnp if seen. Also enable DHCP.
Change it to 192.168.1.1. SAVE REBOOT.
2.
"Multiplay":
it is shown in the modem WAN page PW password ?
and if you use your ID and PW internet connection is lost. Confirm.

Para two:
3.
In computer ( windows OS ) START RUN type cmd OK
New window:
type ipconfig /all
Copy paste data here ONLY for the LAN network.

Originally Posted by essbebe

.

IP Address: 10.239.6.1 Share this result
Location Unknown
Latitude, Longitude 0, 0 (0°0'0"S 0°0'0"W)
Connection through PRIVATE IP ADDRESS LAN
Check in LAN page 10.239.6.1 is entered.


Enable Upnp if seen. Also enable DHCP.
Change it to 192.168.1.1. SAVE REBOOT.
2.
"Multiplay":
it is shown in the modem WAN page PW password ?
and if you use your ID and PW internet connection is lost. Confirm.

Para two:
3.
In computer ( windows OS ) START RUN type cmd OK
New window:
type ipconfig /all
Copy paste data here ONLY for the LAN network.

Oh ok..
No, I don't get connected to the internet at all. I have to change in advanced settings WAN.. There in the first tab, I click "EDIT" and change the user name and password to my name and pass.


I enter 192.168.1.1 to connect to the router page. Under WAN page, I use my name and pass and internet works.. And when I check the "management" settings, I see "multiplay" is enabled.. BUT, when I disable it and reboot the modem, I get the 10.239.6.1 IP and connection doesn't work.. When I see the WAN page again, it is MULTIPLAY!! and under "management", The multiplay is enabled automatically!!! So, For internet to work, I go to the WAN page again, and put my user name back!! and reboot modem again. After doing this it works fine.

Where is Upnp?

Enable Upnp if seen.
Delete insert picture.
2.
Start NETWORK LAN Properties
New page.
Disable IPV6
Select( highlight IPV4
Properties
New page.
enter 192.168.1.3
255.255.255.0
192.168.1.1.
dns 8.8.8.8
8.8.4.4.
Apply SAVE.

I enter 192.168.1.1 to connect to the router page. Under WAN page, I use my name and pass and internet works.

When you go to Management ? Just SAVE reboot.

And when I check the "management" settings, I see "multiplay" is enabled.

all menu items may not be seen in your model.

Post screenshot. with multiplay entry.