hav wa3002g1 modern cofigured as folllows...it is connected with of of my laptop(a) to acess net ..i hav another laptop(b) which is connected to moderm using wifi..but i m not able to acess net...i can only open 192.168.1.1 page in my other laptop(b)...the cofig are as follows
interface setup
internet lan
virtual ckt pvc0 ip address 192.168.1.1
status activated sub 255.255.255.0
vpi 0 dynamic routr rip-b direction none
vci 35 multicast diabled
atm qos ubr dhcp enabled
pcr 0 starting ip 192.168.1.33
scr 0 ip count 32
mbs 0 lease time 259200
isp bridge mode dns avail use auto dns server only
encap 1483 bridged ip llc
wireless
acess point activated
ssid xz
broadcast ssid yes
channel id channel062437mhz
auth type wep64
wep key..........
beacon interval 100
rts/cts 2347
fragmentation 2346
dtim 3
802.11 b/g 802.11b+g
this is my config...
when i change isp from bridge mode to pppoa mode....
my net doesent work.....what changes should be made now??



LinkBack URL
About LinkBacks
Reply With Quote