Thread: Configuring UTSTARCOM WA3002G4

i think this is for ppoe.. since you are using bridged mode.. it says FAIL

i thought i was using ppoe...

coz when i say dial dataone, it says connecting through wan ppoe or soemthing to that effect

Dear Sir,

I have exactly follwed your guide but in no avail, pleeeeeeeeeaaaaaasssssseeeee help me to resolve the problem.

@djrudra using a dailer in windows is bridged mode, when your modem dials automatically its called ppoe mode

@kkdolphin please elaborate on your problem so that we can help you

Hey Guys..!

I have changed the admin password and have generated a WEP security for my wireless. I see a lot of articles and posts that say WEP is not enough to secure the connection. Can some please help me with WPA step by step settings to secure my net connection so that no one else will be able to use it.

Thanks,
Praveen

its the same procedure.. just select WPA instead of WEP in the router's settings

Originally Posted by pchandrasekharan

Hey Guys..!

I have changed the admin password and have generated a WEP security for my wireless. I see a lot of articles and posts that say WEP is not enough to secure the connection. Can some please help me with WPA step by step settings to secure my net connection so that no one else will be able to use it.

Thanks,
Praveen

WEP is OK for most general purpose uses. WPA is better. As superprash has said, the process is the same, just slight changes.

p/s. There are a lot of posts on this. Please do read them.

hello friends and internet gurus
i am a starter of broad band home500 plan ,i am so weak in computer concepts and terminology. i have wa3002g4 to connect my destop and laptop and i have started to use utorrent to download some softwares download speed is so low as 12kb but the web speed and other normal downloads are abt 100kb/s
in the form i have seen port forwarding to enable fast download of torrants.pls friend how to port forward my modem to make my torrents fast with simple steps .i have connection when switched on i connected to net.
pls innore my little knowledge abt this topic.



pls help me to acheive the full download speed with your valuable helping datas


cheers
sankar

senior members pls solve my above query


cheers
sankar

hello people i got bsnl broadband few days back, i have the WA3002G4 modem and im on Vista Premium, my problem is that i am unable to connect through wireless on my laptop but i can connect when i plug in the ethernet wire to my laptop, any help will be appreciated.

is your modem configured in bridged mode or ppoe mode?

Originally Posted by superprash2003

is your modem configured in bridged mode or ppoe mode?

how do i find that out?

how do you currently connect to the internet?? by dialing a connection in windows or by just switching on your modem?

Originally Posted by superprash2003

how do you currently connect to the internet?? by dialing a connection in windows or by just switching on your modem?

i plug in the ethernet wire to the laptop from the modem.

when your laptop is connected via wifi, type ipconfig in the windows command prompt and post screenshot here

it said i needed 15 posts to post URLs to other sites so im gonna copy paste the info here.



Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ac21:de9f:4bf6:3b2f%9
IPv4 Address. . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

in your Wireless LAN adapter Wireless Network Connection TCP/IP properties disable IPv6 & enable only IPv4.

did that but still no result

I am having a BSNL Broadband with WA3002G4 Modem.I want to connect my HTC Touch Cruise mobile phone through my WA3002G4 Wireless connection.My phone's WLAN detects and connects to the Modem but no webpage opens.Can somebody help me out.
Please help me................hmy:

go to http://192.168.1.1 and ensure that DHCP is switched on..

I am having a BSNL Broadband with WA3002G1 Modem connected to desktop computer through LAN. Recently I bought a laptop and I successfully configured so as to connect to internet from both desktop computer (through LAN) and from laptop (through wireless) at the same time.

Logon to the modem from browser (192.168.1.1, admin/admin)
Go to Status -> Device Info -> WAN and note down the DNS server.
Go to Interface Setup -> Wireless.
Wirless LAN -> Access point = Activated
Wirless LAN -> Broadcast SSID = Yes
Wirless MAC Address Filter -> Active = Activated
In Mac Address #1 enter your laptop’s MAC address.
In your laptop found out your wireless network connection’s physical address / MAC address. Use “ ipconfig / all “ in command prompt.
You can add more than one wireless connection using #1 to #8.
Any changes should be saved.

Configure your TCP/IP properties of your desktop computer
IP Address. . . . . . . . . . . : 192.168.1.10 (actually greater than 1)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Preferred DNS Server ( already noted down)
Configure your TCP/IP properties of your laptop computer
IP Address. . . . . . . . . . . : 192.168.1.11 (actually greater than 1)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Preferred DNS Server ( already noted down1)
Hope you can connect to inter from both desktop and laptop. Good luck.

Hai! I got Dataone BB connection before 1 year. For the convenience of downloading during the night unlimited hours (2 a.m. to 8 a.m.), I want to change the bridge setting of my modem to PPPoE.

The most pitiful thing is I am unable to find the method to do this for the model of the modem what I have. So I kindly request you to guide me or atleast inform me where I can find the method tho change the setting.

Modem Manufacturer : SemIndia
Modem Model : DNA-A201BE

THANK YOU

all the modems have similar settings to configure them in pppoe mode.you have to edit connection properties(name something like 0_35_)& change protocol from bridged to pppoe with rest of settings same.take a look here to get an idea---
BSNL BROADBAND MAIN MENU

Thank You WhiteStar. I will try and will inform the result.

You dont need to scratch brains for any configuration stuff, If it were to be so technical to configure; then this modem cannot be so foolproof as I found. I am a techi and I used my logical skills to configure this.

All I did is restored to factory settings and then simply entered the correct username and password in the pppoe_0_35_1 service editor. Then saved and rebooted the modem. Thats all!!!

Later, if you would like to use the additional features of the modem such as NAT, RIP and stuff, you can then apply your techincal skills but without damaging the defaults.

Please post if you guys need any clarifications.