Results 1 to 2 of 2

Configuring UT300R2U modem with router

  1. #1
    Junior Member
    Join Date
    Jun 2013
    Posts
    2

    Default Configuring UT300R2U modem with router

    Hi,

    I want to configure router with wire-line broadband (UT300R2U). So that i can access wireless internet on mobile & laptop.

    Kindly suggest instructions step by step.

    Thanks in advance.
    God Bless u.

  2. #2
    Junior Member
    Join Date
    Mar 2011
    Posts
    2

    Default

    1. Disconnect modem and connect your router to the PC
    2. Login into the router page and update it's LAN address in the LAN tab to a different IP and not the same as the ISP gateway.
    3. After update give a name to SSID in wireless setup and also a encryption password under wpa-psk2/wpa=psk .
    4. Save the settings in the router.
    5. Connect the modem and router with a lan cable, first switch on modem and then router, then you should get going once the initial boot up is over.

    Rajagopal

Similar Threads

  1. Replies: 18
    Last Post: 18th December 2012, 08:11 PM
  2. Replies: 3
    Last Post: 17th November 2009, 09:39 PM
  3. UT300R2U ADSL2+ Modem to 3COM wireless router
    By bsnl_pjs in forum BSNL broadband
    Replies: 2
    Last Post: 24th May 2009, 06:16 PM
  4. Configuring LinkSys WRT54A+G with BSNL UT300R2U modem
    By SeshuChamarthi in forum BSNL broadband
    Replies: 8
    Last Post: 9th April 2009, 11:01 PM
  5. configuring dataone router UT300R2U with VOIP
    By mngmg in forum BSNL broadband
    Replies: 1
    Last Post: 5th June 2008, 06:37 AM