India Broadband

superprash2003 · 21-05-2008

hi,
have you tried out the guide by just4kix?It's available on the first page of this thread.Please try that out first

subaru · 21-05-2008

Hi Just4kix
You are doing an awesome job. Very nice documentation. I was able to get through the first half. unfortunately I still need help since i have a zyxel P320W wireless router. I configured router as per your instruction although my UT300R2U router's interface looked different.

Anyway, my desktop now connects fine through the router. But my laptop still has problem connecting to the wireless lan. The windows icon tells me that it is connected, but the ip doesn't look right and I am not able to connect to the internet? Any help here would be greatly appreciated. Thanks!

superprash2003 · 21-05-2008

are you getting some ip like 169.x.x.x? could you post your ipconfig output?

nageshbs@gmail.com · 21-05-2008

first configure your UT300RTU to connect to internet in PPPOE..
then connect the modem to one of the LAN ports.. it never
worked with the WAN port of the router.. then disable DHCP and IP
of the router to 192.168.1.x. as just4kix said the third octet of the IP
needs to be same..

just4kix · 22-05-2008

Let me clear a few things:

a) There is no need to disable DHCP in the two routers. I have DHCP=ON on both devices and it works perfectly. The choice is left to you.
b) If you leave DHCP=ON on both, the WAN/Internet port of 2nd router must be used.

subaru · 22-05-2008

hi superprash2003
169.254.3.77 is the ip address. subnet 255.255.0.0 and no gateway or dns.

superprash2003 · 22-05-2008

what is the ip address of the modem? what is the ip addres of the wifi router? Check if DHCP is enabled in the router or modem? ensure that its enabled either in the modem or the router.Or you could just go to LAN tcp/ip properties and enter static ip address there..

just4kix · 23-05-2008

Quote:

Originally Posted by subaru

hi superprash2003
169.254.3.77 is the ip address. subnet 255.255.0.0 and no gateway or dns.

That IP address means that you are not connected to the router's network.

hariskaimal · 26-05-2008

I tried following the instructions. Everythin works fine except when at the last page when i check the status, the router tries connecting to the network and gives me an error message "Could not get IP address from PPOE server".

Please help...

superprash2003 · 26-05-2008

re ensure that you have entered your bsnl username and password correctly!!

22-05-2008	#105
just4kix Guardian Angel Join Date: Dec 2007 Location: Pune Posts: 3,450 Rep Power: 4	Let me clear a few things: a) There is no need to disable DHCP in the two routers. I have DHCP=ON on both devices and it works perfectly. The choice is left to you. b) If you leave DHCP=ON on both, the WAN/Internet port of 2nd router must be used. __________________ * My computer can beat me at chess but is no match when it comes to kick-boxing * My Albums \| My Movie Collection \| My Games Collection

22-05-2008	#107
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 1,198 Rep Power: 2	what is the ip address of the modem? what is the ip addres of the wifi router? Check if DHCP is enabled in the router or modem? ensure that its enabled either in the modem or the router.Or you could just go to LAN tcp/ip properties and enter static ip address there.. __________________ Check out my tech tutorials at prash-babu.blogspot.com

26-05-2008	#109
hariskaimal Junior Member Join Date: May 2008 Age: 23 Posts: 2 Rep Power: 0	Cannot get IP address from PPOE server... I tried following the instructions. Everythin works fine except when at the last page when i check the status, the router tries connecting to the network and gives me an error message "Could not get IP address from PPOE server". Please help...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using BSNL Huawei modem with Airtel	samking	Airtel Broadband	25	01-09-2008 03:07 PM
Setup of Linksys WRT54G wireless router	pramodhegde	BSNL broadband	9	14-06-2008 05:30 PM
Linksys Wireless Router Setup with BSNL's ADSL Modem.	prakashgis	BSNL broadband	1	22-11-2007 05:23 PM
Help Needed Wireless Router Setup with Sify Broadband	VJB	Sify broadband	4	08-10-2007 07:20 PM
Help needed on Billion 5200S ADSL Router Config	anserkk	Tata Indicom broadband	6	28-08-2007 10:25 PM

India Broadband

Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G

Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads

21-05-2008	#101
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 1,198 Rep Power: 2	hi, have you tried out the guide by just4kix?It's available on the first page of this thread.Please try that out first

21-05-2008	#102
subaru Junior Member Join Date: May 2008 Posts: 2 Rep Power: 0	Hi Just4kix You are doing an awesome job. Very nice documentation. I was able to get through the first half. unfortunately I still need help since i have a zyxel P320W wireless router. I configured router as per your instruction although my UT300R2U router's interface looked different. Anyway, my desktop now connects fine through the router. But my laptop still has problem connecting to the wireless lan. The windows icon tells me that it is connected, but the ip doesn't look right and I am not able to connect to the internet? Any help here would be greatly appreciated. Thanks!

21-05-2008	#103
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 1,198 Rep Power: 2	are you getting some ip like 169.x.x.x? could you post your ipconfig output?

21-05-2008	#104
nageshbs@gmail.com Junior Member Join Date: Apr 2008 Posts: 2 Rep Power: 0	first configure your UT300RTU to connect to internet in PPPOE.. then connect the modem to one of the LAN ports.. it never worked with the WAN port of the router.. then disable DHCP and IP of the router to 192.168.1.x. as just4kix said the third octet of the IP needs to be same..

22-05-2008	#106
subaru Junior Member Join Date: May 2008 Posts: 2 Rep Power: 0	hi superprash2003 169.254.3.77 is the ip address. subnet 255.255.0.0 and no gateway or dns.

26-05-2008	#110
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 1,198 Rep Power: 2	re ensure that you have entered your bsnl username and password correctly!!