India Broadband

superprash2003

its a wifi router right?? so you can connect your laptop to the wifi router wirelessly.. if not you could just connect it to the 2nd LAN port..

Santosh_CHANDEL

and its not working here in Banglore, do i have to purchase that one..

I have tried all the steps but, its not working.. I can connect to modem .. but while pinging the outer dns ip , its saying reply from modem but not reachable to this dns ip address.. so reaching any site is outofscope..

If you please email me anything .. if you can.. to santosh_chandel@hotmail.com..

Thanks..
Santosh

superprash2003

which modem do you currently have?? are you in bridged mode or ppoe mode? have you set vpi/vci 0/35 cause mtnl uses 0/32

asifpm

I did what u suggested Prash. But once I change the IP of wifi router, I am not able to access with new IP (192.168.1.100) by typing the same in browser. I dont know what to do. Do I hav to make any changes for the LAN properties. Now its set to automatically configure IP, Subnet, gateway
Please help

Thanks
Asif

asifpm

Hi Prash,
I am able to connect to wireless and I connected 2 laptops also in wireless mode. But on yesterday when I tried to connect, its says I am connected but limited connectivity. I tried switching off and on both laptop, modem and wifi router. Still didnt work. Even I checked the key also. thats also correct.

Then I reset wifi router. and login again with admin, then I change DHCP enable to disable and allow reboot, after rebooting its says limited connectivity for the lan. Here I have connected just wifi router and laptop using lan port.

Please help me to figure it out

Thanks
Asif

Santosh_CHANDEL

Hey Guys..

Dont go for those complex method.. Those are absoutely.. nonsense..
Just use simple that work for you..

If you know your ISP provider name and your username and password..

Then you surf net in few secs..


Here we go
1. Go to your My Network Places and right click on the icon
and
2. Go to properties.
3. Add Click on Create a New Connection.
4. Follow the Wizard.
5. Select the top option to .. Connect to internet.
Then Click next
6. Set up my connection manually.
Then Click next
7.Connect using a broadband connection that requires username and password.
Then Click next
8.Type you provider name.. check if it works for in caps or small letters for ISP provider's name.

Then Click next
9.Put your username and password and don't change anything.[Make sure both the check boxes are ticked]
Then Click next
10 Put the check on the option like Add a shortcut to this connection to my desktop and
then click Finish.

Now you can see an icon with your ISP provider's name on your desktop.

11. Double\Right click on the icon and click connect after giving your password there.

12. Open Internet Browser and surf net..

Happy Journey..

Take Care..

Thanks,
Santosh

superprash2003

@asifpm could you post the output of ipconfig from the command prompt..a screenshot would help
@santhosh_CHANDEL
you are talking about bridged mode which will not work in this situation as asifpm has two laptops and wants to use the internet simulatenously!!!so ppoe mode is the only solution!!!

__________________
Check out my tech tutorials at prash-babu.blogspot.com

just4kix

@santosh_CHANDEL, you have only talked about creating a dialer for a bridge mode, just as superprash2003 said.

Configuration of modem and router is entirely different and is not a child's play either. This guide talks about this and if you go carefully in the guide, creating a dialer is also covered in a section.

__________________
*** My computer can beat me at chess but is no match when it comes to kick-boxing ***

My Albums | My Movie Collection | Moser Baer Movies

Admin

What exactly are you reffering to as nonsense? Would you care to elaborate for us all please.

just4kix

Dear God, Forgive them for they know not what they are speaking ....