Hi,

Today post updating the Wi-Fi MAC filter, my BSNL UTSTARCOM WA3002G4 doesn't seems to be coming up.

So, I ended up doing hard reset. Post hard reset, when I hit http://192.168.1.1 through browser I see a page asking for


"Update Software

Step 1: Obtain an updated software image file from your ISP.

Step 2: Enter the path to the image file location in the box below or click the "Browse" button to locate the image file.

Step 3: Click the "Update Software" button once to upload the new image file.

NOTE: The update process takes about 2 minutes to complete, and your DSL Router will reboot.

Software File Name: "



I tried using various firmwares available in this forum without any luck. I could ping 192.168.1.1 post hard reset (with my system n/w setting manually set to 192.168.1.10). But after pushing various firmwares, IP 192.168.1.1 wont be reachable. So every time, ended up hard resetting again to reach initial point.

I also tried the BSNL firmware update (http://www.motive.bsnl.co.in/Product...ploaderApp.exe). Got message "UTStarcom Modem Detected Press OK to continue" during first step. but 2nd stage showed "Modem Firmware version Detected is not a supported by the Application. Please contact BSNL for Support".

Post hard reset, i did try to access various links (http://192.168.1.1/look.html, http://192.168.1.1/main.html, http://192.168.1.1/menu.html etc). But all the links were showing following message

"
404 Not Found
File not found.
micro_httpd
"


Any suggestion?

Thanks,
Sud